AquaStar Pipeline Filter Relief Valve Assembly | PF1025
AquaStar Pipeline Filter Relief Valve Assembly | PF1025
SKU#: PF1025
PF1025 AquaStar Pipeline Filter Relief Valve Assembly for PLF27000 and PLF35000
$22.99
While holding the Locking Ring in place with one hand, use the other to rotate the filter dome by holding and aiming the Air Relief Valve where you intend the water to spray.
DO NOT AIM AIR RELIEF VALVE AT ELECTRIC EQUIPMENT OR PUMP CONTROLS.
If the Dome rotates with Locking Ring when being held with one hand, or you need two hands to rotate the Locking Ring, alternate using both hands to rotate the Locking Ring and then the Dome until it is where you want it (E).
-
Product Details
About this product
Description
Inspect the Cartridge again for damage, holes, and rips or splits in the filter media. If no damage is found, it can be reinstalled and reused.
System Restart Instructions
1. Reinstall the filter Cartridge with the “THIS SIDE UP” showing as it is
placed onto the Filter Core Assembly.
2. Lower the Cartridge and Core Assembly into the filter Housing with
the Automatic Air Release screen located on the Outlet side of the
filter Housing. Try to rotate it. If it turns, keep turning until it drops
into place.
3. Install the Lid Assembly by following the instructions above. Make
sure the Locking Ring is fully closed and locked. Check by attempting
to turn the Locking Ring using the SMALL handles in a counterclockwise direction. The Locking Ring should NOT turn.
4. Reinstall the Drain plug, after making sure the O-ring is clean,
lubricated with silicon-based grease (provided) and in place. (or close
the Drain valve if installed).Highlights
5. OPEN THE MANUAL AIR RELIEF VALVE ON TOP OF THE FILTER.
6. Open all isolation valves.
7. Stand away from the filter and then turn on the pump, being sure to
follow the pump manufacturer’s priming and start-up instructions. If
the pump is working and isolations are in the correct position, air will
begin existing the Manual Air Relief Valve on the top of the filter.
8. When a steady stream of water comes out of the Manual Air Relief
Valve, close the valve.
9. Observe the operating filter for leaks, keeping in mind that water from the Manual Air Relief Valve may drip down
the side of filter after passing between the filter Housing and the Locking RingFeatures
While holding the Locking Ring in place with one hand, use the other to rotate the filter dome by holding and aiming the Air Relief Valve where you intend the water to spray.
DO NOT AIM AIR RELIEF VALVE AT ELECTRIC EQUIPMENT OR PUMP CONTROLS.
If the Dome rotates with Locking Ring when being held with one hand, or you need two hands to rotate the Locking Ring, alternate using both hands to rotate the Locking Ring and then the Dome until it is where you want it (E).
Brand Information
AquaStar co-founder, inventor and engineer Olaf Mjelde has over 30 years of experience in the engineering and manufacturing business, and for many years developed complex assemblies for numerous Fortune 500 companies. At AquaStar, every product is held to the highest standard of quality, resulting in superior, dependable products that last; products that endure despite their continual exposure to harsh pool chemicals and intense ultraviolet light.
Visit Manufacturers Website -
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account