Jandy SHPF and SHPM Pump Diffuser with O-Ring and Hardware Kit | R0445400

$59.99
In stock
SKU
R0445400
- +
Ask a Question

Ask a Question

Jandy SHPF and SHPM Pump Diffuser with O-Ring and Hardware Kit | R0445400

SKU#: R0445400

R0445400  Jandy 0.5HP-3HP Diffuser with O-Ring and Hardware Replacement Kit for Pro Series SHPF/SHPM Pumps

$59.99

Ask a Question
Jandy SHPF and SHPM Pump  Diffuser with O-Ring and Hardware Kit | R0445400 Jandy SHPF and SHPM Pump  Diffuser with O-Ring and Hardware Kit | R0445400 Jandy SHPF and SHPM Pump  Diffuser with O-Ring and Hardware Kit | R0445400
Jandy SHPF and SHPM Pump  Diffuser with O-Ring and Hardware Kit | R0445400
  • Product Details

    About this product

    Description

    Impeller/Diffuser and Hardware Replacement

    1.Refer to Figure 2 and the associated parts list to identify the parts included in each replacement kit.

    2. Using a No. 1 Phillips screwdriver, remove the two (2) screws attaching the diffuser to the backplate. Carefully remove the diffuser from the backplate. See Figure 3.

    3. Remove any debris from the inlet and outlet of the impeller.

    4. Remove the motor shaft cover on the back of the motor by twisting the hex-head screw with an adjustable wrench. The motor shaft will be exposed.

    5. Hold the exposed motor shaft with a ½" wrench while removing the impeller center screw. Use a No. 2 Phillips screwdriver. Turn the left-handthreaded screw clockwise to loosen it.

    6. While holding the motor shaft with a ½" wrench, thread the new impeller onto the motor shaft. Hand-tighten the impeller until it is secure.

    7. Using a No. 2 Phillips screwdriver, tighten the impeller’s center screw into the center of the impeller. Turn the left-hand-threaded screw counter-clockwise to tighten it. Do not overtighten.

    8. Replace the motor shaft cover by inserting the cover tabs into the slots and rotating the cover 90º clockwise.

    9. Install the new diffuser over the impeller. Make sure you insert the alignment pins into the correct holes. The molded-in arrow must align with the molded-in arrow on the backplate. See Figure 3.

    10. Install the two (2) Phillips-head screws. Tighten the screws to draw the diffuser against the backplate.

    11. To avoid a leak, make sure the diffuser o-rings, o-ring grooves, and o-ring seal area are clean and free of debris. If grease is used to retain the o-rings, it must be silicone based. Do not use petroleum-based grease, because it will destroy the o-rings.

    12. If you are not installing another replacement kit, skip to Section 6, Pump Assembly.

    Highlights

    • Fits Zodiac Jandy ePump, Stealth, PlusHP, WaterFall, MaxHP Series Pump Models: JEP, SHPF/SHPM, PHPF/PHPM, SWF, MHPM
    • Single and efficient 2-speed models are available.
    • Features the largest trap basket on the market for reduced maintenance.
    • Includes ergonomic handles and easy to read indicators.
    • Quiet Technology for reduced noise levels.
    • .5, .75, 1.0, 1.5, 2.0, 2.5, 3.0, 5.0 HP Models available.

    There is no debris blocking the impeller and the pressure is still low -  The pump impeller and diffuser are showing signs of normal wear. Have a qualified service technician check the impeller and diffuser and replace as necessary. If the pump is part of a relatively new installation, it could be an electrical problem. Contact a qualified service technician. Have the technician check for loose electrical connections and check the voltage at the pump motor while it is in operation. The voltage must be within 10% of the motor's data plate rating. If the voltage is not within 10%, contact a qualified electrician and/or the local power service provider.

    Features

    Brand Information

    Build the perfect pool environment with Jandy professional-grade swimming pool equipment. With a full line of pumps, filters, heaters, lights, valves, water sanitizers, and the automation solutions to control it all, Jandy has the complete equipment package for any swimming pool or spa.

    Visit Manufacturers Website
  • Specifications
  • Q/A
    No Questions

Similar items

WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov