Waterway Truseal Diverter Kit | 600-7160

TRUSEAL TRIGGER LOCK HANDLE USE:

Note: The valve handle must not be removed during use. The warranty is void if removed. To turn the handle squeeze trigger and move to the desired position.

OFF INDICATOR

The off area on the indicator represents the exact position of the internal valve diverter sea

HANDLE STOPS

Protruding stoppers located on the valve cover will stop the diverter in the complete port shut-off position.

TRUSEAL FLOW INDICATOR TAGS

There are flow indicator tags that must be attached to ensure flow to the designated port. Be sure the "INLET" tag is positioned on the valve cover over the desired incoming flow port. NOTE: For some installations, it may be desirable to permanently glue the flow indicator tags in place. When doing this, remove the lid valve assembly from the valve body prior to gluing flow indicator tags. When replacing the lid/ valve assembly hand tighten screws evenly to ensure correct sealing. DO NOT over-tighten.