Water Bonding Fitting | PB-2008
Water Bonding Fitting | PB-2008
SKU#: PB-2008
PB-2008 Perma-Cast Water Bonding Fitting for Swimming Pools and Hot Tubs
$29.99
What parts of a swimming pool require bonding?
Section 680.26(B) of the 2005 National Electric Code (NEC) requires bonding of all the metal structures, fittings and parts that are horizontally within five feet of the pool wall and vertically within twelve feet above the maximum water level of the pool.
The following parts require bonding:
• Reinforcing metal of the pool shell, coping stones and deck.
• Metal conduits, metal door frames and metal window frames within five feet of the inside pool wall.
• Metal forming shells and mounting brackets of lighting fixtures.
• Metal fittings such as hand rails, ladders, metal drains and diving board.
• Metal casings of electrical equipment such as pump motors, pool water heaters and equipment associated with pool covers.
-
Product Details
About this product
Description
Bonding Connections
The requirements for connections between the metal parts and the equipotential grid are also specified in the code (Exhibit 2):
• Use an insulated, covered, or bare solid copper conductor not smaller than 8 AWG or use brass or other corrosion resistant metal conduits.
• Use exothermic connectors or pressure type connectors that are labeled as being suitable for the purpose and are of
stainless steel, brass, copper or copper alloyHighlights
Complies with NEC 680.26(C)UL Listed1" NPT Water Bonding Fitting10.6 Square Inches of Surface AreaFeatures
What parts of a swimming pool require bonding?
Section 680.26(B) of the 2005 National Electric Code (NEC) requires bonding of all the metal structures, fittings and parts that are horizontally within five feet of the pool wall and vertically within twelve feet above the maximum water level of the pool.
The following parts require bonding:
• Reinforcing metal of the pool shell, coping stones and deck.
• Metal conduits, metal door frames and metal window frames within five feet of the inside pool wall.
• Metal forming shells and mounting brackets of lighting fixtures.
• Metal fittings such as hand rails, ladders, metal drains and diving board.
• Metal casings of electrical equipment such as pump motors, pool water heaters and equipment associated with pool covers.Brand Information
OVER 40 YEARS OF SUPERIOR CASTINGS Manufactured in U.S.A. PERMA-CAST LLC AFFILATE OF WCM INDUSTRIES INC. 1871 Aspen Circle Pueblo, Colorado 81006 PH:719-544-9544 FAX:719-544-3106
Visit Manufacturers Website -
Specifications
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account