Natural Chemistry System Flush Plus for Spa 16oz | 90014SKR

DIRECTIONS FOR USE

For Whirlpool Baths:

1. Fill tub with warm water and add 1A cup System Flush for Spas.
2. Run jets at high speed for 15 minutes, then drain.
3. Wipe shell with a little System Flush for Spas on sponge or cloth.

Repeat monthly.

For Spas:

1. When it's time to change your spa water, first REMOVE filter, adjust water level if necessary, but DO NOT DRAIN.
2. Add System Flush for Spas directly into old spa water: add 1/2 bottle for 400 gallons of spa water (4 tablespoons per 100 gallons}.
3. Run spa at high speed with all jets and water features for 15 - 30 minutes, or overnight at low speed (if convenient}.
4. Drain water, clean spa shell. Use a small amount of System Flush for Spas on sponge or terrycloth to wipe residues.
5. Reinstall clean filter, refill, and balance spa water.
6. Repeat with every water change, (about 90 -120 days}.