Pentair Sta-Rite WhisperFloXF 5HP Variable Speed Pump | 022035
Pentair Sta-Rite WhisperFloXF 5HP Variable Speed Pump | 022035
SKU#: 022035
022035 Pentair Sta-Rite WhisperFloXF 5HP Innovative Variable Speed Pump for Commercial Pool
In store only
- Integrated 5HP motor/drive; no expensive external drive required.
- Versatile power input capability; runs off a wide range of single- orthree-phase power.
- Speed or flow control for maximum efficiency and pool performance*.
- External control capability through automation systems or relays.
- Intuitive programming and operation.
- Meets commercial codes and agency requirements.
- WEF: 5.0 THP: 5.0
CALCULATE YOUR SAVINGS
Estimate how much you can save on energy costs by switching to a variable speed pool pump.
Use the calculator below.
-
Product Details
About this product
Description
The WhisperFloXF VS Commercial Pump is the first five-horsepower variable-speed pool pump that runs on single-phase or three-phase power. It’s an economical, combined motor/drive solution for both HMAC (hotel, motel, apartment, condominium) or large residential installations. The WhisperFloXF VS Commercial Pump provides sophisticated, energy-saving pump technology without the high costs typically associated with independent pump/external drive setups
Highlights
Low Energy Use
Four programmable settings that can be set to any speed ranging from 300 to 3450 RPMs allowing you to program the exact flow requirements for each task, assuring the lowest energy use possible…adding to your savings.
Breakthrough Motor and Variable Speed TechnologyCombines breakthrough motor and controllable, variable speed technology that combine to drive down energy use and cost. Increased savings potential may be measured in thousands of dollars over its long life.
Digital Controls
Features variable speed capability, along with digital controls and proprietary software that allow custom programming of optimum pump speeds for specific tasks—filtering, heating, cleaning, spa jets, etc.
SLOWER IS BETTER FOR ENERGY SAVINGS
What's the secret to minimizing your pump energy costs? The slower the better. Operate your pump at the lowest speed needed to get the job done. Reducing your pump motor speed by just 25% reduces power needed by 58%.
Features
- Integrated 5HP motor/drive; no expensive external drive required.
- Versatile power input capability; runs off a wide range of single- orthree-phase power.
- Speed or flow control for maximum efficiency and pool performance*.
- External control capability through automation systems or relays.
- Intuitive programming and operation.
- Meets commercial codes and agency requirements.
- WEF: 5.0 THP: 5.0
CALCULATE YOUR SAVINGS
Estimate how much you can save on energy costs by switching to a variable speed pool pump.
Use the calculator below.Brand Information
Founded in 1966, Pentair has engineered water solutions to filter, clean and sanitize water to its purest state, while automation equipment makes it all easy to control from anywhere so that you can truly enjoy your pool and spa.
Visit Manufacturers Website -
Specifications
Pump Body
Volute type back pull out design for ease of working on impeller,
diffuser and seal.
• Port Size
- Inlet (suction): 2.5" union can be adapted to 3 inches.
- Outlet (discharge): 2.5" union can be adapted to 3 inches.
• Material
- 30% glass filled polypropylene materials.
- 1⁄4" NPT thermoplastic drain plug of thumbscrew
(no tool required) design on the strainer for winterizing.
• Impeller
- Noryl glass filled PPO resin enclosed design for corrosion
prevention and maximum flow efficiency.
- Threaded brass with stainless steel locking screws.
• Diffuser
- Glass filled noryl thermoplastic material with bronze impeller
wear ring.
- Hydraulic isolator design for maximum efficiency.
• Seal plate
- Fiberglass reinforced modified PPE thermoplastic material.
• Mechanical Seal
- Ceramic and carbon seal.
- Stainless steel and EPDM materials
• Base
- Fiberglass reinforced modified PPE thermoplastic with
slotted holes for easy mounting.
• Gaskets
- Buna N rubber compression resistant.
• Bolts, Nuts, and Washers
- Stainless steel and brass with nickel plating.
• Corrosion Prevention
- All thermoplastic pump body for maximum hydraulic
performance, noise reduction and corrosion prevention.Hair and Lint Strainer
• Basket
- HDPE (polyethylene) basket colored white for easy debris removal.
- Securely positioned below the suction inlet of the trap, with
access for inspection and cleaning through the removable lid.
• Lid
- Clear polycarbonate thermoplastic lid for easy view into the
basket area.
• Lid Locking Ring
- Cam and Ramp™ Lid and Locking Ring allow for quick and easy
access to the basket.
- O-ring seal
Motor
• Frame and Type
- NEMA Rated 56 Frame totally enclosed fan-cooled construction.
- Variable speed induction motor.
• Shaft
- 300 series stainless steel construction.
• Thermal Overload Protection
- Thermal overload protection provided by the integral
motor control.
• Sealed Bearings
- Lubricated, double sealed, stainless steel, single row
ball bearings.
Electrical
- 208-230/277-460V single-phase.
- 208-460V three-phase.
- 50/60Hz.
- WEF 5.0 THP 5.0.
- Single part number to cover all voltage ranges.
Pump Maximum Thermal Limits
- Ambient air temperature: 122˚ F (50˚ C).
- Liquid temperature: 104˚ F (40˚ C).
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account