Jandy, WaterColors, LED Color Pool Light, 120V, 100' Cord | CSHVRGBWS100

In store only

$599.99

In stock
SKU
CSHVRGBWS100

Available
in store only

$599.99

Ask a Question

Ask a Question

Jandy, WaterColors, LED Color Pool Light, 120V, 100' Cord | CSHVRGBWS100

SKU#: CSHVRGBWS100

In store only
  • Controlled by a single light switch or seamlessly interfaces with our Smart Color Control
  • Dedicated white LEDs in addition to Red, Green and Blue LEDs
  • Long life, less than 50 watts of power, available in 120V and 12V versions
  • Choose from nine vibrant colors or five dramatic light shows
Ask a Question
Jandy, WaterColors, LED Color Pool Light, 120V, 100' Cord | CSHVRGBWS100 Jandy, WaterColors, LED Color Pool Light, 120V, 100' Cord | CSHVRGBWS100
Jandy, WaterColors, LED Color Pool Light, 120V, 100' Cord | CSHVRGBWS100
  • Product Details

    About this product

    Description

    Energy-efficient RGBW pool and spa lights Jandy WaterColors pool and spa lights offer energy efficiency in an ultra-slim profile and simple installation. The addition of the White diode to our existing RGB lights will even further enhance the brilliance of the nighttime pool experience by providing a purer white tone. WaterColors are ETL classified and fit into existing niches from Pentair and Hayward as well as Jandy ProNiches.

    Highlights

    Dedicated white LEDs in addition to Red, Green and Blue LEDs

    Long life, less than 50 watts of power

    Choose from nine vibrant colors or five dramatic light shows

    Features

    • Controlled by a single light switch or seamlessly interfaces with our Smart Color Control
    • Dedicated white LEDs in addition to Red, Green and Blue LEDs
    • Long life, less than 50 watts of power, available in 120V and 12V versions
    • Choose from nine vibrant colors or five dramatic light shows

    Brand Information

    Build the perfect pool environment with Jandy professional-grade swimming pool equipment. With a full line of pumps, filters, heaters, lights, valves, water sanitizers, and the automation solutions to control it all, Jandy has the complete equipment package for any swimming pool or spa.

    Visit Manufacturers Website
  • Specifications

    Installing the Light Fixture

    NOTE Perform these steps only after the electrical system requirements are met.

    1. Feed cord through conduit to junction box, leaving at least four (4) feet of cord at the light fixture to coil into the base of the light niche, see Figure 1. The four (4) feet of cord allows the light to be serviced after the pool is filled with water.


    2. Cut the cord at the junction box, leaving at least six (6) inches of cord to make connections.
    3. Strip six (6) inches of the outer cord jacket to expose the three insulated wires. Be careful not to damage the insulation on the three (3) inner wires.
    4. Install strain relief over cord jacket and connect all three (3) wires to the corresponding circuit wires in the junction box. Install the junction box cover.
    5. Coil the 4-foot length of cord around the fixture or into the base of the pool niche, and place the light assembly into the niche.
    6. Engage the retainer tab on the bottom of the face ring, then pivot the top of the fixture inward and tighten the special pilot screw.

    WARNING
    Use only the special pilot screw provided with this underwater light. This screw mounts and electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw provided could create an electrical hazard, which could result in death or serious injury to pool or spa users, installers or others due to electrical shock.

    7. Fill the pool until the underwater light is completely submerged in water before operating the light for more than 2 minutes. The light will heat up quickly when operated outside of water. Turn on main switch or circuit breaker, and the switch, which operates the underwater light, to check for proper operation. 

  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov