Jandy, Incandescent White Pool Light, 120V, 500W, 100' Cord | WPHV500WS30

In store only

$209.99

In stock
SKU
WPHV500WS30

Available
in store only

$209.99

Ask a Question

Ask a Question

Jandy, Incandescent White Pool Light, 120V, 500W, 100' Cord | WPHV500WS30

SKU#: WPHV500WS30

In store only
  • Plastic and stainless steel niches available
  • Corrosion-free stainless steel housing, long-lasting bulbs, and diffused tempered glass offer you hassle-free ownership
  • Available in 12V and 120V models
  • Incandescent version offers you all the choices you need for any pool
Ask a Question
Jandy, Incandescent White Pool Light, 120V, 500W, 100' Cord | WPHV500WS30 Jandy, Incandescent White Pool Light, 120V, 500W, 100' Cord | WPHV500WS30
Jandy, Incandescent White Pool Light, 120V, 500W, 100' Cord | WPHV500WS30
  • Product Details

    About this product

    Description

    Installing the Light Fixture

    1. Feed cord through conduit to Junction Box, leaving at least four (4) feet of cord at the light fixture to coil around the light; see Figure 1 (or Figure 2, for spa). This four (4) feet of cord around the light allows the light to be serviced after the pool or spa is filled with water.


    2. Cut the cord at the Junction Box, leaving at least six (6) inches of cord to make connections.
    3. Strip six (6) inches of the outer cord jacket to expose the three insulated wires. Be careful not to damage the insulation on the three (3) inner wires.
    4. Install strain relief over cord jacket and connect all three (3) wires to the corresponding circuit wires in the Junction Box. Install the Junction Box cover.

    WARNING:

    Never operate this underwater light for more than 10 seconds unless it is totally submerged in water. Without total submersion, the light assembly will get extremely hot, which may result in serious burns or in breakage of the lamp or lens. This may result in serious injury to pool or spa users, installers, or bystanders or damage to property.

    5. Coil the 4-foot length of cord around the fixture and place the light assembly into the niche.
    6. Engage the retainer tab on the bottom of the face ring, then pivot the top of the fixture inward and tighten the special pilot screw.

    WARNING:
    Use only the special pilot screw provided with this underwater light. This screw mounts and electrically grounds the mounting ring to the wet niche. Failure to use the screw provided could create an electrical hazard, which could result in death or serious injury to pool or spa users, installers or others due to electrical shock.

    7. Fill the pool or spa until the underwater light is completely submerged in water before operating the light for more than 10 seconds. Turn on main switch or circuit breaker, and the switch, which operates the underwater light, to check for proper operation. 

    Highlights

    Incandescent version offers you all the choices you need for any pool.

    Long lasting bulbs

    Corrosion-free stainless steel housing

    Features

    • Plastic and stainless steel niches available
    • Corrosion-free stainless steel housing, long-lasting bulbs, and diffused tempered glass offer you hassle-free ownership
    • Available in 12V and 120V models
    • Incandescent version offers you all the choices you need for any pool

    Brand Information

    Build the perfect pool environment with Jandy professional-grade swimming pool equipment. With a full line of pumps, filters, heaters, lights, valves, water sanitizers, and the automation solutions to control it all, Jandy has the complete equipment package for any swimming pool or spa.

    Visit Manufacturers Website
  • Specifications

    Light up the night with Jandy Pro Series White pool and spa lights. Illuminate your pool and spa for an evening swim, backyard entertainment and added safety.

  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov