IPS Controllers VidaPure TM Pump Squeeze Tube 2 pack| VP501

$44.99
Out of stock
SKU
VP501
Ask a Question

Ask a Question

IPS Controllers VidaPure TM Pump Squeeze Tube 2 pack| VP501

SKU#: VP501

VP501 IPS Controllers VidaPure TM Pump Squeeze Tube for Automated Chemical Feed System Controllers

Write a Review

IPS Controllers  VidaPure TM Pump Squeeze Tube 2 pack| VP501

IPS Controllers VidaPure TM Pump Squeeze Tube 2 pack| VP501

SKU# VP501

Manufacturer: IPS CORPORATION

Price:
$44.99
Rating
$44.99

Ask a Question
IPS Controllers  VidaPure TM Pump Squeeze Tube 2 pack| VP501 IPS Controllers  VidaPure TM Pump Squeeze Tube 2 pack| VP501 IPS Controllers  VidaPure TM Pump Squeeze Tube 2 pack| VP501
IPS Controllers  VidaPure TM Pump Squeeze Tube 2 pack| VP501
  • Product Details

    About this product

    Description

    B. pH level too high or Alert LED On
    1. Sensor tip is dirty: Clean according to maintenance instructions.
    2. Improper pH sensor calibration: Adjust pH calibration.
    3. Chemical feeder is empty (Acid): Refill the feeder.
    4. Chemical feed pump or squeeze tube malfunction: Repair the feed pump or replace the squeeze tube. A squeeze tube will last 3-6 months for commercial properties and 6-12 months for residential properties.
    5. Chemical dose time too low: Increase dose time.
    *High alkalinity will require more acid than usual to maintain pH levels. Always target 80-120ppm

    Features

    Brand Information

    Headquartered in California, IPS Corporation can be identified as one of the most trusted manufacturers of rough plumbing and roofing supplies for the construction industry. IPS Corporation ensures high quality plumbing products and leading customer service.

    Visit Manufacturers Website
  • Specifications

    Chlorine/Bromine level too low or Alert LED On
    1. pH should be at your desired set level before addressing any potential ORP problems.
    2. ORP Set level is too low: Check Sanitizer level with test kit and adjust set Level as necessary 29 M820 pH/Dual ORP Controller Owner’s Manual
    3. Controller undershooting set level: 1) Check for proper valve positions and leaks in chlorine lines, or 2) Increase dosing time if using timed feed, or switch to continuous feed if using a salt chlorine generator.
    4. Chemical dose time too low: Increase the dose time.
    5. Chemical feeder is empty: Refill the feeder.
    6. Chemical check valve/injector is clogged: Switch acid feed tube
    to chlorine injector to clean, or replace them.
    7. Chemical feed pump or squeeze tube malfunction: Repair the feed pump or replace the squeeze tube. A squeeze tube will last 3-6 months for commercial properties and 6-12 months for residential properties.
    8. Sensor malfunction: Replace sensor.

  • Q/A
    No Questions

Similar items

WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov