Hayward Goldline Flow Switch 15 ft Salt Aqua Rite | GLX-FLO-RP

$74.99
In stock
SKU
GLX-FLO-RP
- +
Ask a Question

Ask a Question

Hayward Goldline Flow Switch 15 ft Salt Aqua Rite | GLX-FLO-RP

SKU#: GLX-FLO-RP

AquaRite, Hayward Goldline Aqua Rite Salt Generator FLO Flow Switch GLX-FLO-RP with a 15' cord.
 
 
$74.99
  • Genuine OEM Hayward Part
  • Hayward Aqua-Rite Flow switch
  • Fits Hayward or Aquarite salt chlorine generator all sizes
  • 15-feet cable

 

aqua-riteAQUARITEPRO

 
Ask a Question
Hayward Goldline Flow Switch 15 ft Salt Aqua Rite | GLX-FLO-RP
Hayward Goldline Flow Switch 15 ft Salt Aqua Rite | GLX-FLO-RP
  • Product Details

    About this product

    Description

    This flow switch assembly without tee is designed to use with Hayward salt chlorine generator.

    AquaRite, Hayward Goldline Aqua Rite Salt Generator FLO Flow Switch GLX-FLO-RP.

    GLX-FLO-RP Flow switch is factory original The GLX-FLO-RP screw into your existing tee and comes with a 15' cord.

    Replacement flow switch for use on the following chlorinators:
    • Mineral Springs (all models)
    • Aqua Trol Above Ground Pool Automation (all -HP models)
    • SplashCLEAR (all models except -RJ versions)
    • Aqua Rite Electronic Chlorine Generators (all models)
    • Naturesoft Water Purification System (all models)

    Highlights

    Installs in flow switch tee

    15ft cord

    OEM Flow Switch Kit



    Features

    • Genuine OEM Hayward Part
    • Hayward Aqua-Rite Flow switch
    • Fits Hayward or Aquarite salt chlorine generator all sizes
    • 15-feet cable

     

    aqua-riteAQUARITEPRO

     

    Brand Information

    Hayward Industries, Inc. is the largest manufacturer of residential swimming pool equipment in the world. Headquartered in Elizabeth, New Jersey, Hayward designs and markets the Totally Hayward® System, a complete line of state-of-the-art, energy efficient residential pool equipment including pumps, filters, heaters, heat pumps, cleaners, electronic control systems, electronic chlorinators, lighting, safety equipment.

    Visit Manufacturers Website
  • Specifications

    Replacement Installation

    1. Unscrew flow switch from the plumbig tee by turning counter clockwise until the switch is completely off the tee
    2. Carefully bend rubber flaps if applicable and insert into the tee making sure not to damage the switch.
    3. Tighten switch to make sure there are no leaks.DO NOT over-tighten.
    4. Make sure that arrows on the flow switch are facing in the direction of waterflow
    5. Plug the flow switch into the connection on the bottom of the electronics unit.
  • Q/A
    No Questions

Similar items

WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov