Natural Chemistry Green Aid Shock Treatment 2 lb| 17642COR
Natural Chemistry Green Aid Shock Treatment 2 lb| 17642COR
SKU#: 17642COR
17642COR Natural Chemistry Green Aid 2 lb for Shock Treatment with an EPA-Registered Chlorinating Compound that Kills Green or Yellow Algae without the need to Brush.
$17.99
- Typical results occur in 24 hours
- Works great with higher pH (7.8+)
- Not affected by high levels of cyanuric acid
- Works well with salt chlorine generators
- NO metals added with this product
- Can be used with all pool surfaces
-
Product Details
About this product
Description
Green Aid is ideal for the “modern pool.” Many pools are using salt chlorine generators and/or have a plaster nish. Both of these conditions can create a higher pH in pool water (especially new plaster), which happens to be the ideal condition in which Green Aid works. The recommended pH level is 7.8 or higher for ideal performance. This is the opposite of traditional algae treatment methods which require a lower pH for chlorine to be more ecient. Green Aid is not negatively impacted by higher levels of cyanuric acid.
Highlights
- Scrub free pool clean-up
- Typical results occur in 24 hours
- Add 2 lb per 15,000 gallons of pool water
Features
- Typical results occur in 24 hours
- Works great with higher pH (7.8+)
- Not affected by high levels of cyanuric acid
- Works well with salt chlorine generators
- NO metals added with this product
- Can be used with all pool surfaces
Brand Information
Authorized Resellers. This Policy, the NC Brands LP Authorized Reseller Policy (“Reseller Policy”) is issued by NC Brands LP and its affiliate Bio-Lab, Inc. (collectively “NC Brands”) and applies to Authorized Resellers of NATURAL CHEMISTRY, AQUAPILL, and SEAKLEAR pool and spa water treatment products (“Products”) in the United States of America. By purchasing Products from NC Brands, or any distributor of NC Brands for resale, you (“Reseller,” “you,” or “your”) agree to adhere to the following Reseller Policy. Please read this Reseller Policy carefully. If you do not accept the terms of this Reseller Policy, return the Products to NC Brands for a refund of the amount you actually paid NC Brands for the Products. Until such status is otherwise revoked by NC Brands in NC Brands’ sole and absolute discretion, Reseller shall be considered an “Authorized Reseller” hereunder. This Reseller Policy is effective as of February 1, 2022, and shall supersede the terms of any policies previously provided to Reseller by NC Brands that are inconsistent with the terms herein.
Visit Manufacturers Website -
Specifications
INSTRUCTIONS
Initial Application
- CAUTION! (a) NEVER pre-mix GREEN AID with chlorine (b) NEVER add GREEN AID to a bucket or pail (c) NEVER vacuum pool immediately after application (d) NEVER add to skimmer basket or filter suction line! Very strong reaction with chlorine can occur if not mixed in pool. Circulate pool water through filter and, for best results, brush pool well before beginning.
- SHAKE WELL TO BREAK UP THE LUMPS (product lumping in transit is normal). Adjust chemical balance to: pH > 7.8, alkalinity 80 -120 ppm, cyanuric acid 25 - 75 ppm and chlorine level 2 - 2.5 ppm.
- ADD DIRECTLY TO POOL 2 POUNDS GREEN AID per 15,000 gallons water. Spread half of it along the perimeter of the pool, starting where the algae are the thickest. Concentrate the rest directly over the problem areas. Never add more than is recommended.
- WAIT 5 MINUTES, THEN ADD DIRECTLY TO POOL 2 pounds powdered chlorine (or equal) per 15,000 gallons water.
- CIRCULATE POOL WATER with filtration continuously for 24 hours using only the main drain if possible. Repeat step 4, adding additional chlorine after 12 and 24 hours.
- Return equipment and chemical balance to normal after clean up.
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account