CMP Spa Suction Cover Gray | 25201-039-000

INSTALLATION:
1. Using hole saw, cut/drill the installation hole.
2. If optional gasket is used, gasket must be placed around threads of suction wall fitting at this time.
3. Place threads of wall fitting through hole from the inside (water side) of tub.
4. Install nut from dry side of tub onto the threads of the wall fitting. Start install of screws by hand to ensure proper thread engagement and to prevent cross threading. DO NOT USE POWER TOOLS TO INSTALL FASTENERS.
5. If silicone is used on fitting, verify that silicone is compatible with ABS and PVC plastics. No adhesives are to be used
on covers, or other attachment methods that prevent access to suction piping or SOFA components requiring periodic
servicing
6. Using torque wrench, torque nut to <44.0 ft. lbs. (60Nm). Apply a small amount of silicone to the threads to ensure
proper tightening torque
7. Verify that the suction cover is properly tightened with the #8 316 steel 61000-000-012 stainless steel screw in brass inserts to 10 in-lbs.