CMP Brilliant Wonders Smart Sync Waterfall LED Control | 25677-900-000
CMP Brilliant Wonders Smart Sync Waterfall LED Control | 25677-900-000
SKU#: 25677-900-000
25677-900-000 CMP Brilliant Wonders Smart Sync Led Waterfall Adapter For Jandy, Pentair and Hayward Controllers.
$239.99
- Smart Sync 36 Watt - Rated Max 3.0A
12VAC- Controls up to 8 ft of LED Waterfalls - Smart Sync 60 Watt - Rated Max 5.0A
12VAC - Controls up to 12ft Led Waterfalls - Only use 12VAC input power from an approved low voltage landscape op pool and spa lighting transformer
- Each Waterfall requires 5 Watts per Foot
- Always Use with Class 2 lsolated transformer in between pool controls and Smart Sync.
- Not compatible with CMP Brilliant Wonders Colorwheel Control
CMP/J-STYLE SYNC INSTRUCTIONS
To operate the light and change colors:
• Turn the light ON. The first time the light is turned on, the color sequence will begin with Alpine White. To change color, turn light OFF then back ON within three (3) seconds. Continue turning OFF and ON until the desired light color mode is reached.
• When the light is turned off for more than seven (7) seconds, it will remain in the color mode that was currently active when the light was turned off.
• To RESET the light to the beginning color sequence (Alpine White), turn the light OFF, wait four (4) to six (6) seconds, then turn the light ON.
-
Product Details
About this product
Description
P-STYLE COLOR SELECTION AND SYNC INSTRUCTIONS
To operate the light and change colors:
• The P-Style lights can be controlled using a standard wall-mount light switch. Multiple lights can be connected via a junction box to a single switch so that all lights can be switched ON and OFF together. “P” Style Lights are controlled by cycling the AC power from a standard wall switch. By turning the switch ON and OFF a specific number of times, the light activates one of the seven (7) light show modes, fixed colors, and enables the “Hold” and “Recall” feature.
• No special sync instructions are required for P-Style lights. The lights will re-sync automatically each time they are powered on.Highlights
H-STYLE SYNC INSTRUCTIONS
To operate the light and change colors:
• The H-Style lights are operated through power-cycling; a method of changing modes which requires no special controller or interface. To activate the lights simply turn the power switch ON. To advance to the next programmed light mode, turn the switch OFF then back ON within ten (10) seconds. Whenever the lights have been off for more than sixty (60) seconds, and it is first turned on, they will come on white for 15 seconds, then go back to the last programmed light mode it was running before being powered off.
To sync the light with additional H-STYLE lights:
• The H-Style lights can easily be synced with additional H-Style lights. All lights should be wired to the same switch, this should automatically sync the lights. If the lights get out of sync on the same switch: turn the switch OFF, then wait between eleven (11) and fourteen (14) seconds and turn the switch back ON. When the lights come back on, they should enter program mode number one (1) and be synchronized.Features
- Smart Sync 36 Watt - Rated Max 3.0A
12VAC- Controls up to 8 ft of LED Waterfalls - Smart Sync 60 Watt - Rated Max 5.0A
12VAC - Controls up to 12ft Led Waterfalls - Only use 12VAC input power from an approved low voltage landscape op pool and spa lighting transformer
- Each Waterfall requires 5 Watts per Foot
- Always Use with Class 2 lsolated transformer in between pool controls and Smart Sync.
- Not compatible with CMP Brilliant Wonders Colorwheel Control
CMP/J-STYLE SYNC INSTRUCTIONS
To operate the light and change colors:
• Turn the light ON. The first time the light is turned on, the color sequence will begin with Alpine White. To change color, turn light OFF then back ON within three (3) seconds. Continue turning OFF and ON until the desired light color mode is reached.
• When the light is turned off for more than seven (7) seconds, it will remain in the color mode that was currently active when the light was turned off.
• To RESET the light to the beginning color sequence (Alpine White), turn the light OFF, wait four (4) to six (6) seconds, then turn the light ON.Brand Information
CMP is a leader in products for the recreational pool and spa industry. Innovative products from CMP include sanitizer systems, white goods, LED lighting, water features and accessories. CMP is committed to creating solutions for pool and spa industry professionals. Spa designers, pool builders, bath manufacturers and retail store owners around the world depend on CMP products, service and support.
Visit Manufacturers Website - Smart Sync 36 Watt - Rated Max 3.0A
-
Specifications
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account