Clear Spa 104° pH Plus Increaser 2lbs OREQ | CSSA002

$9.99
In stock
SKU
CSSA002
- +
Ask a Question

Ask a Question

Clear Spa 104° pH Plus Increaser 2lbs OREQ | CSSA002

SKU#: CSSA002

pH Plus Elevates The pH of Spa Water, Enhancing Sanitizer Efficacy and Ensuring Maximum Comfort for Spa Users

$9.99

Recommended pH Range for Spa 7.2 - 7.8 

ACTIVE INGREDIENTS:

SODIUM CARBONATE ........... 100.00%

SDS - Safety Data Sheet

pH Plus Directions of Use

Gradually elevates pH levels, enhancing the efficiency of sanitizers and enhancing spa water comfort. Clear Spa 104° pH Plus is used to increase pH levels incrementally until reaching the optimal range of 7.2 - 7.8, potentially requiring multiple applications.
Ask a Question
Clear Spa 104° pH Plus Increaser 2lbs OREQ | CSSA002
Clear Spa 104° pH Plus Increaser 2lbs OREQ | CSSA002
  • Product Details

    About this product

    Description

    DIRECTIONS FOR USE:
    This product should be used as necessary when pH is below 7.2.
    NOTE: For best results, dissolve granular products first by adding to a small, plastic pail filled with water. Then, apply the solution to the spa water. pH Amount of pH Plus to use per 500 gallons.
    6.8 – 7.2 1 oz. (2 tablespoons)
    below 6.8 2 oz. (4 tablespoons)

    1. Determine amount of this product to use.
    2. Make sure equipment is OFF.
    3. Add applicable amount of this product to the spa water
    4. Turn on circulation system for 1 – 3 hours.
    5. Retest water after 3 hours.
    6. If pH is still below 7.2, repeat steps 1 – 5.

    Highlights

    Clear Spa 104° pH Plus™
    Symptom: Low pH. A low pH (below 7.2) can cause: burning eyes, skin irritation, etching of the interior surface, liner
    wrinkling, corrosion of metal fixtures with resulting stains on the surface, and/or rapid loss of the sanitizer level.
    Remedy: Check and balance the total alkalinity first. Apply any necessary Clear Spa 104° pH Plus in multiple doses to increase the pH of your spa water.

    Features

    Recommended pH Range for Spa 7.2 - 7.8 

    ACTIVE INGREDIENTS:

    SODIUM CARBONATE ........... 100.00%

    SDS - Safety Data Sheet

    pH Plus Directions of Use

    Gradually elevates pH levels, enhancing the efficiency of sanitizers and enhancing spa water comfort. Clear Spa 104° pH Plus is used to increase pH levels incrementally until reaching the optimal range of 7.2 - 7.8, potentially requiring multiple applications.

    Brand Information

    Oreq was founded on its Ornamental & Recreational Equipment business forged by three generations with over 100 years of combined experience in manufacturing of pool & spa products and sheet metal fabrication. At Oreq, everyone works hard to deliver value to be remembered by. Innovation & Quality at an affordable price. Oreq's success is in humbly knowing our value makes the difference. All to be remembered by, all to be measured by.

    Visit Manufacturers Website
  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov