Clear Spa 104° pH Minus 2lbs Oreq | CSSB003

$9.99
In stock
SKU
CSSB003
- +
Ask a Question

Ask a Question

Clear Spa 104° pH Minus 2lbs Oreq | CSSB003

SKU#: CSSB003

pH Minus effectively reduces the pH of spa water, ensuring optimal sanitizer performance while also safeguarding against eye irritation and equipment corrosion.

$9.99

ACTIVE INGREDIENT: SODIUM BISULFATE ............. 95.0%
INERT INGREDIENTS ............. 5.0%
TOTAL ..................................... 100.0%

SDS - Safety Data Sheet

pH Minus Directions of Use


pH Minus will decrease the pH of spa water. The total alkalinity of spa water should be between 80 and 150 ppm. The pH should be between 7.2 to 7.8 ppm. High pH can cause scaling and/or cloudy water.

 

Ask a Question
Clear Spa 104° pH Minus 2lbs Oreq | CSSB003
Clear Spa 104° pH Minus 2lbs Oreq | CSSB003
  • Product Details

    About this product

    Description

    DIRECTIONS FOR USE:
    This product should be used as necessary when pH levels are above 7.8.
    NOTE: For best results, dissolve granular products first by adding to a small container of water.
    Then, apply the solution to the spa water.
    1. Make sure all equipment is OFF.
    2. Add ¼ oz. (1-1/2 tsp.) of this product for every 500 gallons of spa water.
    3. Turn ON circulation system for 30 minutes.
    4. Retest water. If pH is still above 7.8, repeat steps 1-3.

    Highlights

    Clear Spa 104° pH Minus
    Symptom: High total alkalinity - can cause the pH of water to be unstable and create a “bounce” eff ect, not allowing the pH to stay adjusted for any signifi cant period of time.
    Remedy: Lower the total alkalinity using Clear Spa 104° pH Minus in multiple doses unless it is close to time to drain and re-start the chemistry.

    Features

    ACTIVE INGREDIENT: SODIUM BISULFATE ............. 95.0%
    INERT INGREDIENTS ............. 5.0%
    TOTAL ..................................... 100.0%

    SDS - Safety Data Sheet

    pH Minus Directions of Use


    pH Minus will decrease the pH of spa water. The total alkalinity of spa water should be between 80 and 150 ppm. The pH should be between 7.2 to 7.8 ppm. High pH can cause scaling and/or cloudy water.

     

    Brand Information

    Oreq was founded on its Ornamental & Recreational Equipment business forged by three generations with over 100 years of combined experience in manufacturing of pool & spa products and sheet metal fabrication. At Oreq, everyone works hard to deliver value to be remembered by. Innovation & Quality at an affordable price. Oreq's success is in humbly knowing our value makes the difference. All to be remembered by, all to be measured by.

    Visit Manufacturers Website
  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov