Anderson Dye Refill Bottle Blue | LD601
Anderson Dye Refill Bottle Blue | LD601
SKU#: LD601
LD601 Anderson Dye Refill Bottle Blue 8 oz Of Dye Blue For Swimming Pool and Spa Leak Detection Dye Tester
$9.99
BUCKET TEST INSTRUCTIONS:
- Turn off any automatic fill devices. Fill pool to normal level.
- Fill bucket and place in pool on first or second step.
- Mark the water level of the pool and the inside of the bucket.
- Operate pool filter and heater normally.
- After 24 hours measure water level in bucket and the pool as compared to the initial measurement.
- If water loss in pool is greater than the water loss in the bucket there is a leak.
Anderson Swimming Pool and Spa Leak Detection Dye Tester| DT665
-
Product Details
About this product
Description
LEAKMASTER's Pre-Filled Dye Testers help you precisely locate structural pool leaks allowing the appropriate repairs to be made.
INSTRUCTIONS:
- Hold Tester by barrel with plunger down. Remove white cap. Insert pointed end of plastic needle about 1/4" into hole.
- Reduce currents in pool by turning off circulatory systems and getting swimmers out of the pool.
- Carefully push plunger to squirt a small ribbon of dye to within 1/4" of suspected leak area (fittings, light niches, cracks, tile line, skimmers, liner seams, steps, etc.). Dye will be drawn out of pool where there is a leak.
Highlights
ABOUT LEAKS
Leaks are more than just an inconvenience.
An unrepaired hole just 1/16" can lose hundreds of gallons of water a day. Not only is this expensive and wasteful, water loss will increase the chemical demands of your pool, and may lead to more serious problems.
DO BUCKET TEST TO DETERMINE IF WATER LOSS IS DUE TO EVAPORATION OR A LEAK.
NOTE: If the pool looses more water when the pump is running than when it is off, or if you notice air bubbles coming from the return lines, you may have a plumbing leak, this will require professional attention A plumbing leak can cause serious structural damage to your pool. Call vour pool technician immediatelv.
Features
BUCKET TEST INSTRUCTIONS:
- Turn off any automatic fill devices. Fill pool to normal level.
- Fill bucket and place in pool on first or second step.
- Mark the water level of the pool and the inside of the bucket.
- Operate pool filter and heater normally.
- After 24 hours measure water level in bucket and the pool as compared to the initial measurement.
- If water loss in pool is greater than the water loss in the bucket there is a leak.
Anderson Swimming Pool and Spa Leak Detection Dye Tester| DT665
Brand Information
Anderson Manufacturing has been helping swimming pool and leak professionals profitably solve water loss problems. We do so by offering a complete line of problem solving tools and supplies, and by providing information and advice that helps achieve solutions in an efficient manner.
Visit Manufacturers Website -
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account