R0503000 | Jandy Nature2 Fusion Soft 1400 Electrolytic Cell For Salt Systems

The Nature2 Fusion Soft system integrates an electrolytic cell and a mineral cartridge to sanitize pool water effectively. The power pack is wired directly to the pool circulation pump's electrical supply, allowing the electrolytic cell to operate only when the pump is running, ensuring safe and synchronized chlorine generation. Chlorine is produced as saltwater passes through the cell's bipolar electrodes, which are energized by DC current. The chlorine output can be adjusted either via the Chlorine Production Level setting or by changing the system’s daily run time. To ensure continuous performance, the system automatically reverses polarity every three hours to clean the electrodes without halting chlorine production. The mineral cartridge dispenses trace levels of silver and copper to work alongside chlorine, supporting long-term algae control.

Highlights

• Integrated Cell Activation: Power source is linked to the pool pump, ensuring chlorine is produced only when circulation is active

• Flow Sensor Backup: Includes a secondary flow/temp/salinity sensor to enhance system reliability and safety

• Adjustable Chlorine Levels: Output can be customized through the power center or by modifying daily operating hours

• Automatic Electrode Cleaning: Reverses polarity every three hours to prevent scaling and maintain uninterrupted function

• Mineral Support System: Releases silver and copper ions that complement chlorine to keep pool water algae-free

Instructions

• Unplug the DC cord from electrolytic cell.
• Run the pool pump and filter for five (5) minutes. After this time turn off the pool pump.
• Close valves between filter and pool to prevent pool draining.
• Unplug the DC cable from the electrolytic cell.
• Turn the large collar counterclockwise to remove and save for reinstallation.
• Remove the O-ring and discard.
• Remove the existing the electrolytic cell from the vessel.
• Install the O-ring provided in the kit. Make sure the O-ring is seated properly.
• Install the new electrolytic cell into the vessel.
• Hand tighten the large collar. Do not over tighten.
• Plug the DC cable into the electrolytic cell. Press cable down firmly onto ports.
• Reset valves and switches. Turn pump and sanitizer on. Wait five (5) minutes for system to go
  through its diagnostics.
• Confirm chlorine output and settings on the user interface.
• For operating instructions, please refer to the Nature2 Fusion Soft Installation and Operation Manual, originally supplied with the product.
• The purer the salt the better the life and performance of the electrolytic cell. Use a salt that is at least 99.8% pure NaCl. The ideal salt is an evaporated, granulated, food-quality, non-iodized salt. Consult your salt supplier.
• Set chlorine production to 00%. Operating the unit above 00% production without salt will damage the electrolytic cell. The Salinity button C on the sanitizer user interface keypad can be used to determine salinity in the case of a new pool installation, or a complete water change so long as the chlorine production is set to 00%.
• Never use dry acid to adjust pH in arid geographic areas with excessive evaporation and minimal dilution of pool water with fresh water. A buildup of by-products can damage the electrolytic cell.
• Do not operate the electrolytic cell without water circulation. A buildup of flammable gases will result in FIRE or EXPLOSION.

Includes

• (1) Jandy R0503000 Cell
• (1) Jandy Cell O-Ring

Compatibility

• Jandy Nature2 Fusion Soft Water Sanitizer model FSOFT1400

Note: This cell may be compatible with your Salt Chlorination System, please refer to your systems owners manual to ensure compatibility.

Additional Info

R0503000 Electrolytic Cell In Stock For Nature2 Fusion 1400

R0503000 replacement cell for Jandy Fusion Soft FSOFT1400

in-stock R0503000 cell for walk-in replacement at store

pick up R0503000 for saltwater chlorine generation system

Jandy R0503000 includes O-ring for JXI Fusion Soft unit

walk-in service techs use R0503000 for Fusion 1400 fixes

OEM R0503000 Cell For Jandy Fusion Soft Salt Systems

R0503000 fits Nature2 Fusion Soft 1400 chlorine generator

replace damaged cell in Jandy FSOFT1400 with part R0503000

R0503000 enables chlorine production through salt electrolysis

use R0503000 to fix low chlorine output in Jandy Fusion

R0503000 compatible with mineral cartridge + cell combo

Buy R0503000 Electrolytic Cell For Walk-In Salt System Repair

Jandy R0503000 available now for in-store pickup

replace cell in FSOFT1400 with OEM R0503000 component

get R0503000 to restore chlorination in Fusion salt system

in-stock R0503000 fits Fusion Soft power center setup

R0503000 includes polarity-reversing cell for long-term use

Diagram