SwimSense Aqua-Colors 2" Pool Lights With 100' Cord
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Light It Right. Color-Changing LED · 100 ft Cord · 2″ Fitting · 900 Lumens · 3-Year Warranty A universal, color-changing LED pool light built to outlast, outperform, and outvalue every cheap replacement on the market. Patented stainless steel heatsink. 40% lower operating temperature. Compatible with Hayward, Pentair, and Jandy — proudly Made in the USA.
Heat Dissipation. Overheating is why pool lights fail early. SwimSense’s patented stainless steel heatsink and cooling groove design continuously circulates cooler pool water over the LED core — keeping operating temperatures up to 40% lower than standard lights for dramatically longer lifespan.
Every Night. The Aqua-Colors delivers 900 lumens of brilliant, energy-efficient LED illumination with a full range of colors and preset light shows. The lenticular lens provides balanced beam geometry — output is evenly distributed across the pool floor and walls for uniform brightness from edge to edge.
- 900-lumen output — brightness of larger fixtures in compact form
- Lenticular lens for even, balanced coverage across floor and walls
- P/J/H modes — fixed colors and preset color shows
- Integrates with pool automation for app-based control
- Syncs with existing lights — replace only what’s broken
Lasts 30,000 Hours. The Aqua-Colors uses a precision lenticular lens paired with a high-output LED core to distribute light evenly across 350 sq. ft. of pool surface. It maintains over 90% luminous performance after 30,000 hours — far outlasting any halogen or budget LED alternative.
- Precision lenticular lens for 350 sq. ft. even coverage
- Maintains 90%+ luminous output after 30,000 hours
- Low energy draw with full-fixture brightness output
Existing System. The Aqua-Colors drops into Hayward, Pentair, and Jandy niches without rewiring. The standard 2″ fitting and 100 ft cord connect directly to your existing system. Switch between P/J/H modes to match the brand you’re replacing for seamless color sync.
- Compatible with Hayward, Pentair, and Jandy systems
- P/J/H mode switching for seamless brand matching
- Standard 2″ niche — Gunite, Fibreglass, and Vinyl pools
- 100 ft cord reaches most pool configurations
- Pool lights burn out after just 1–2 seasons
- Replacement lights cost hundreds every time
- Most competitors offer only a 1-year warranty
- Standard lights overheat, shortening lifespan dramatically
- Mismatched brands mean replacing the entire system
- Patented heatsink keeps temps 40% lower — far longer lifespan
- 3-year warranty — 3× the industry standard
- 900 lumens — full brightness that lasts 30,000+ hours
- Universal sync — swap only the failed lights, keep the rest
- Made in USA — quality and accountability you can trust
Yes. The Aqua-Colors uses a standard 2″ niche fitting and is designed to replace existing Hayward, Pentair, and Jandy pool lights without rewiring. It installs in Gunite, Fibreglass, and Vinyl pools. For color syncing, use P mode for Pentair systems, J mode for Jandy, and H mode for Hayward.
The Aqua-Colors uses a patented stainless steel heatsink with cooling grooves that guide cooler pool water naturally over the LED surface, keeping operating temperatures up to 40% lower than standard lights. This dramatically extends LED lifespan — maintaining over 90% brightness output after 30,000 hours. Heat is the primary cause of early pool light failure, and the Aqua-Colors is specifically engineered to solve it.
Yes. One of the key advantages of the Aqua-Colors is universal sync capability — you can replace only the failed light and it will sync with your remaining existing lights by selecting the correct P/J/H mode. This eliminates the expensive scenario of replacing the entire lighting system because one unit failed.
Yes. The Aqua-Colors synchronises to and is controlled from industry-standard pool automation equipment. It integrates with major pool automation systems, allowing color and mode control through your existing app exactly as your original light did.
900 lumens in a 2″ compact fixture delivers the brightness typically associated with larger pool light formats. The lenticular lens provides balanced beam geometry, distributing output evenly across the pool floor and walls for uniform brightness from edge to edge across up to 350 sq. ft. — with no hot spots or dim corners.
Questions & Answers
Have a Question?
Be the first to ask a question about this.
Los Angeles Local Installation Request
Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we’ll contact you soon to schedule your local service!