SeaKlear Algae Prevention and Remover | 90 Day | 1 qt | 90411SKR
Same-day local pickup & delivery across the Los Angeles area
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
SeaKlear 90-Day Algae Prevention and Remover 90411SKR is a highly effective, copper-based algaecide designed to eliminate and prevent algae growth in swimming pools for up to 90 days with just one application. It tackles a broad spectrum of algae, including green, blue-green, black, yellow, and mustard varieties. The product is non-foaming and non-staining, making it safe for use on all pool surfaces. For maintenance, use 16 fl oz per 10,000 gallons of water every three months. For severe algae cases, a higher dose of 32 fl oz per 10,000 gallons is recommended. This long-lasting treatment simplifies pool care by replacing the need for frequent algae treatments.
-
Long-Lasting Algae Prevention: SeaKlear 90-Day Algae Prevention and Remover offers up to 90 days of protection against a wide range of algae, including green, blue-green, black, yellow, and mustard varieties, with just one application.
-
Non-Foaming and Non-Staining Formula: This copper-based algaecide is non-foaming and non-staining, making it safe for all pool surfaces while effectively eliminating algae without leaving any residue.
-
Simple Maintenance Dosing: For regular maintenance, use 16 fl oz per 10,000 gallons of water every three months, simplifying your pool care routine by reducing the need for frequent treatments.
-
High-Dose Option for Severe Algae: In cases of severe algae infestations, a higher dose of 32 fl oz per 10,000 gallons is recommended, providing a potent solution for tough algae problems while keeping pool water clean and clear.
- (1) SeaKlear 90411SKR 1 Quart Algae Prevention and Remover
- Maintain pool water in the pH range 7.2 to 7.8. Total alkalinity 80 ppm to 120 ppm. Adjust pH to 7.2 for severe algae.
- Ensure that filtration system is working properly.
- Brush pool regularly.
- Calculate the volume of SEAKLEAR ALGAE PREVENTION & REMOVER required for the pool.
- Add the product directly to pool deep end preferably in front of a water return. Dilute in a bucket of pool water when adding to pools with plaster finishes. SEAKLEAR ALGAE PREVENTION & REMOVER must be used along with adequate levels of an EPA registered sanitizer (e.g. chlorine) to control bacteria.
Questions & Answers
Have a Question?
Be the first to ask a question about this.