Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The Ramuc Tuff Coat UT-221 is a single-component, water-based rubberized non-skid coating formulated in Safety Yellow for high-visibility pool deck, splash pad, dock, and aquatic safety applications. Fully submersible and engineered for both interior and exterior use, it bonds directly to concrete, wood, fiberglass, and metal surfaces — delivering a flexible, impact-resistant, medium-texture finish that dries to 30–35 mils of thickness. Safety Yellow is the go-to choice for marking hazard zones, depth transition areas, lane dividers, ramps, and other high-traffic aquatic surfaces where bold visual contrast and slip-resistant protection are required by safety standards. Covering 40–45 square feet per gallon in two coats, the UT-221 is ready to touch in approximately one hour, top-coatable in one to two hours, and reaches a full chemical cure in 24 hours to 5 days. Applied with a Tuff Coat roller or low-pressure hopper spray gun and thinned with water only, it is VOC-compliant and suitable for commercial and residential aquatic facilities.

- Safety Yellow for High-Visibility Aquatic Marking: The bold Safety Yellow colorway is specifically designed for marking hazard zones, depth transitions, ramps, lane dividers, and safety boundaries on pool decks, splash pads, and aquatic facilities where high-contrast visibility is critical for compliance and safety.
- Fully Submersible, Flexible Rubberized Formula: A single-component, water-based rubberized formula that remains flexible after curing, resisting cracking, peeling, and delamination even in continuously wet, submerged, and chemically active pool and spa environments.
- Bonds to Concrete, Wood, Fiberglass & Metal: Applies directly to a wide range of interior and exterior surfaces without a separate primer, making the UT-221 a versatile coating solution for pool decks, docks, boat ramps, patios, and high-traffic aquatic walkways.
- Medium Texture Non-Skid Finish: Dries to a 30–35 mil rubberized medium-texture surface that provides reliable slip resistance underfoot in wet conditions — reducing the risk of slip-and-fall incidents on pool decks, ramps, and splash zones.
- Fast Dry Times & Easy Water Cleanup: Ready to touch in approximately one hour and top-coatable in one to two hours, with full chemical cure achieved in 24 hours to five days. Water-based formula means easy roller or spray application and simple cleanup with water — no solvents required.
What LA pool owners say about us
Google reviews of our 8 stores — our service and shopping experience, not reviews of this product.
