Ramuc Submersible UT-219 Rubber White Non-Stick Coating | 21906
Same-day local pickup & delivery across the Los Angeles area
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The Ramuc Tuff Coat UT-219 is a single-component, water-based rubberized non-skid coating in White, engineered for pool decks, splash pads, docks, boat ramps, and high-traffic aquatic surfaces requiring a clean, bright, slip-resistant finish. Part of the proven UT-200 series, its formula cross-links urethanes, acrylics, co-polymers, and recycled rubber granules into a flexible, fully submersible coating that bonds directly to concrete, wood, fiberglass, and metal without a separate primer. White is one of the most versatile colorways in the Tuff Coat line — equally suited for full deck applications, waterpark surfaces, pool coping, and as a bright base layer when paired with lane marking or safety accent colors. Covering 40–45 square feet per gallon in two coats, the UT-219 dries to touch in approximately one hour, is top-coatable in one to two hours, and reaches a full chemical cure in 24 hours to five days. Applied with a Tuff Coat roller or low-pressure hopper spray gun, thinned with water only, and fully VOC-compliant.
- Clean White Finish for Aquatic Surfaces: White is one of the most widely used colorways in the Tuff Coat line, delivering a bright, neutral finish ideal for full pool deck coverage, waterpark surfaces, pool coping, and as a versatile base layer when combined with safety or lane-marking accent colors.
- Fully Submersible, Flexible Rubberized Formula: A cross-linked blend of urethanes, acrylics, co-polymers, and recycled rubber granules creates a flexible, impact-resistant coating that resists cracking, peeling, and delamination in continuously wet, submerged, and chemically active aquatic environments.
- Bonds to Concrete, Wood, Fiberglass & Metal: Adheres directly to a wide range of interior and exterior surfaces without a separate primer, making the UT-219 a versatile solution for pool decks, splash pads, docks, boat ramps, patios, and high-traffic walkways.
- Medium Texture Non-Skid Surface: Dries to a rubberized, medium-texture finish at 30–35 mils of thickness, providing reliable underfoot traction in wet conditions and reducing slip-and-fall risks on pool decks, ramps, and aquatic surfaces.
- Fast Dry Times & Easy Water Cleanup: Touch-dry in approximately one hour and top-coatable in one to two hours, with full chemical cure in 24 hours to five days. Water-based and VOC-compliant, with easy roller or spray application and straightforward water cleanup — no solvents required.
Questions & Answers
Have a Question?
Be the first to ask a question about this.