Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Poolmart Pro Series Phosphate Remover for Pools Max+ 32 oz | PQ269
Pickup, delivery and shipping times are estimates, not guarantees.
Couldn't load pickup availability
● 484 in stock30-day returns Secure checkout
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
ActingRemoves phosphates on contact. No waiting for it to start working.
Works on Contact. Concentrated Max+ is built on lanthanum chloride, the active pros reach for when phosphate levels need to come down fast. It binds phosphates as soon as it hits the water, and your filter captures what it removes. Formulated for professional use, sold in a 32 fl oz concentrate.
- Instant acting formula removes phosphates on contact
- Helps prevent algae growth by removing its food source
- Lets your sanitizer do more with less
- Made in USA, Poolmart Professional Pool & Spa Supplies line
600 ppb. Test phosphates as part of your routine, not just when algae shows up. Keeping levels below 600 ppb keeps the algae food supply low and takes load off your chlorine. If a test reads higher, dose by the chart, filter, and retest.
- Test phosphates regularly, even when the water looks clear
- Dose by the chart, starting at 2 oz
- Run the filter 24 to 48 hours after treating
- Clean or backwash the filter, retest, reapply if needed
Phosphates do not change how the water looks. They build up from rain, runoff, leaves, and swimmers, feed algae, and make chlorine work harder. Testing and keeping levels below 600 ppb helps stop algae before it starts.
Test first, then dose by the chart: 0 to 600 ppb add 2 oz, 600 to 1,200 ppb add 4 oz, 1,200 to 2,000 ppb add 7 oz. Over 2,000 ppb, add 8 oz, then retest and repeat. Apply evenly over as much of the pool surface as possible.
Water may turn cloudy or milky when phosphate levels are high. That is the phosphate being removed. Keep the filter running 24 to 48 hours, and do not swim while the water is cloudy. If filter pressure rises, clean or backwash the filter.
Do not swim while the water is cloudy. Once the water has cleared after filtering, and your water levels are in the proper range, the pool is ready.
No. Phosphate remover is not a sanitizer. It removes the phosphates that make chlorine work harder, so your sanitizer can do more with less. Keep your chlorine in its normal range.
Los Angeles Local Installation Request
Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we will contact you soon to schedule your local service!