PB-2008 | Perma-Cast Water Bonding Fitting

The Perma-Cast PB-2008 Water Bonding Fitting is a key component used to connect swimming pool water to the equipotential bonding grid as required by the National Electrical Code (NEC). This robust 1″ NPT fitting is UL-listed and offers over 10 sq in of conductive surface area, helping ensure your pool plumbing and water have equal electrical potential and reduce shock hazards. This fitting is engineered to meet original Perma-Cast specifications, making it a trusted choice for new builds or upgrades to meet NEC 680.26(C) compliance. Constructed from corrosion-resistant material and easy to install inline with your plumbing or within a bonding kit, the PB-2008 promotes safety and peace of mind for both in-ground and above-ground pool systems.

Highlights

• Electrical Bonding Compliance: Helps fulfill NEC 680.26(C) code requirements by tying pool water to the equipotential bonding grid.

• 1″ NPT Threaded Fitting: Standard NPT connection makes it compatible with most pool plumbing setups.

• Ample Conductive Surface: Over 10 sq in of conductive area ensures reliable electrical contact with pool water.

• Corrosion-Resistant Construction: Durable material resists pool chemicals and outdoor exposure for long-lasting performance.

• Straightforward Installation: Designed for easy placement inline with pool plumbing or as part of a PoolBond kit.

Additional Info

The Perma-Cast PB-2008 Water Bonding Fitting is a UL-listed bonding component designed to electrically bond pool water to the equipotential bonding grid. This FAQ covers compatibility, installation guidance, and common questions related to NEC bonding compliance. Use the sections below to verify fitment, understand proper placement, and avoid common bonding mistakes.

Compatibility With Pool Bonding Systems

Correct compatibility is essential to meet electrical code requirements and ensure safe bonding performance. The PB-2008 is designed to integrate with specific plumbing and bonding configurations.

What pool systems use the Perma-Cast PB-2008 water bonding fitting?

The PB-2008 is used in both in-ground and above-ground pool systems that require water bonding under NEC 680.26 C. It installs inline with pool plumbing or within a PoolBond plumbing setup. Walk-in customers often ask about this fitting when correcting or upgrading bonding connections.

Does the PB-2008 work with standard pool plumbing sizes?

The Perma-Cast PB-2008 uses a 1 inch NPT threaded connection, which is compatible with many common pool plumbing configurations. Thread size should be confirmed before installation to ensure a proper seal. Available locally, this fitting is commonly paired with PVC bonding kits.

Can the PB-2008 be used without a bonding grid connection?

The PB-2008 is designed to connect pool water to the equipotential bonding grid and should not be used as a standalone component. Without a proper bonding connection, electrical continuity is not achieved. Before visiting Discount Pool Mart, confirming the bonding layout helps ensure correct use.

Installation and Bonding Setup

Installing the PB-2008 correctly ensures reliable electrical contact with pool water. Proper placement is critical for safety and code compliance.

Where is the Perma-Cast PB-2008 installed in the plumbing line?

The PB-2008 is installed inline at a location where water flows continuously, often near the equipment pad. This allows consistent electrical contact with the pool water. Walk-in customers often ask about placement when retrofitting older systems.

Does installing the PB-2008 require special tools?

Installation typically requires basic plumbing tools and thread sealant for the NPT connection. The system should be shut down and depressurized before installation. Once installed, the fitting provides over 10 square inches of conductive surface area.

What issues occur if the PB-2008 is installed incorrectly?

Improper installation can reduce electrical contact or cause leaks at the threaded connection. Incorrect placement may also prevent proper bonding continuity. Verifying alignment before tightening helps avoid these issues.

In-Store Pickup and Local Guidance

Bonding components often require verification before installation. Local support can help ensure the correct setup.

Can I pick up the Perma-Cast PB-2008 in store?

Yes, the PB-2008 may be available locally for pick up in store depending on stock. Before visiting Discount Pool Mart, having your plumbing size and bonding plan ready helps speed up confirmation. This is helpful when work is scheduled soon.

Should I bring photos of my bonding setup to the store?

Bringing clear photos of the plumbing and bonding grid connection point helps with verification. Walk-in customers often do this to confirm placement and compatibility. This reduces the risk of incorrect installation.

Can staff help confirm NEC bonding requirements?

Yes, staff can help review how the PB-2008 fits into a typical bonding layout. Bringing measurements or photos allows quicker confirmation. This helps ensure the installation aligns with common NEC bonding practices.