Natural Chemistry Green Aid Algaecide | 2 lbs | 17642COR
Same-day local pickup & delivery across the Los Angeles area
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The Natural Chemistry Green Aid Algaecide 17642COR is a highly effective treatment designed to eliminate green, mustard, brown, and pink algae in pools. It works best when used in conjunction with an EPA-registered chlorine-based shock. This algaecide is particularly effective in pools with high pH levels (7.8+), and its formula is unaffected by high cyanuric acid levels. It does not introduce metals into the water, making it safe for use on all pool surfaces, including those using saltwater chlorine generators. Green Aid transforms algae-laden pools back to clean, clear water, typically within 24 hours. The recommended dosage is 2 pounds per 15,000 gallons of water, followed by the addition of chlorine to maximize the treatment’s effectiveness.
-
Effective Against Multiple Algae Types: Green Aid Algaecide is designed to eliminate green, mustard, brown, and pink algae, providing a powerful solution for a wide range of algae infestations in pools.
-
Works with High pH and Cyanuric Acid Levels: This algaecide is particularly effective in pools with high pH (7.8+) and is unaffected by high cyanuric acid levels, making it suitable for pools with challenging water chemistry conditions.
-
Safe for All Pool Surfaces: Green Aid contains no metals, ensuring safe use on all pool surfaces, including pools with saltwater chlorine generators, without the risk of staining or corrosion.
-
Fast-Acting Results in 24 Hours: When used with an EPA-registered chlorine shock, Green Aid transforms algae-filled pools back to clean and clear water, typically within 24 hours, with a recommended dosage of 2 pounds per 15,000 gallons of water.
- (1) Natural Chemistry 17642COR 2 Pounds Green Aid
- (a) NEVER pre-mix Green Aid with chlorine. (b) NEVER add Green Aid to a bucket or pail. (c) NEVER vacuum pool immediately after application. (d) NEVER add to skimmer basket or filter suction line. Very strong reaction can occur with chlorine if not mixed in pool. Circulate pool water through filter and, for best results, brush pool before product application.
- Shake well to break up the lumps (product lumping in transit is normal). Adjust chemical balance to: pH ≥ 7.8, alkalinity 80-120 ppm, cyanuric acid 25-75 ppm and chlorine level 2-2.5 ppm.
- Add directly to pool 2 pounds of Green Aid per 15,000 gallons of water. Spread half of it along the perimeter of the pool, starting where the algae is the thickest. Concentrate the rest directly over the problem areas. Never add more than is recommended.
- Wait 5 minutes, then add directly to pool 2 pounds of powdered chlorine (or equal) per 15,000 gallons of water.
- Circulate pool water with filtration continuously for 24 hours using only the drain if possible. Repeat step 4, adding additional chlorine after 12 and 24 hours.
- Return equipment and chemical balance to normal after clean up. For best results, more detailed instructions will be found at: www.greenaidpool.com or ask your store for instruction supplement. RINSE CONTAINER THOROUGHLY AND DISPOSE OF PROPERLY.
Questions & Answers
Have a Question?
Be the first to ask a question about this.