Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.




Others Turn Around. JetIQ propulsion gives the EON 100 the grip to climb onto steps and uneven surfaces, and SmartMap navigation plans a path around your pool's actual shape instead of bouncing wall to wall. Step Cleaning Mode and Cove Mode focus on the spots that collect debris most.
- Cleans floor, walls, waterline, steps, sun and safety ledges
- SmartMap line-by-line and maze coverage patterns
- JetIQ propulsion for grip on steps and slopes
- Four brushes, two active scrubbing brushes

Up to a Week of Clean. Pick a 1.5, 2, or 2.5 hour cycle, or let UltraRun spread cleaning across the week on a single charge. The Maytronics One app handles scheduling, cycle choice, filter status, water temperature, and alerts. The sealed Monoblock filter lifts out the top, so emptying it takes seconds and debris stays inside.
- Modes: Full, Floor Only, Waterline Only, UltraClean, UltraRun, SMART
- Maytronics One app over Wi-Fi when the robot is out of the water
- 70 micron sealed Monoblock filter with top access
- Choose which wall it parks at for easy pickup
Yes. Maytronics rates the EON 100 to clean steps, safety ledges, and sun or tanning ledges with as little as 8 inches of water. JetIQ propulsion and Step Cleaning Mode are designed for climbing onto those surfaces, which most robotic cleaners skip.
A standard cycle runs 1.5, 2, or 2.5 hours. In UltraRun mode the robot spreads shorter cleaning sessions across the week, and Maytronics rates it to keep the pool clean for up to 7 days on one charge. Actual results depend on pool size and debris load.
Yes. It climbs the walls and scrubs the waterline, and Waterline Only mode lets you run the tile line by itself when that is all the pool needs.
Yes. It is rated for in-ground and above-ground pools up to 50 ft long, in rectangular, round, kidney, and free-form shapes, on vinyl liner, gunite, fiberglass, tile, mosaic, glass, ceramic, and stainless steel surfaces.
The EON 100 works with the Maytronics One app over Wi-Fi when the robot is out of the water. Use it to schedule cleans, choose cycles and modes, check filter status and water temperature, set the parking wall, and troubleshoot.
Maytronics covers the EON 100 with a 2-year limited warranty. Keep your receipt and register the robot with Maytronics.
Los Angeles Local Installation Request
Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we will contact you soon to schedule your local service!
