Jandy X-Series X500 AOP Sanitizer for Pools up to 50K Gal | JAOPX500

The Jandy X-Series X500 AOP In-Line System (JAOPX500), powered by DEL technology, combines UV-C light and ozone in one full-flow unit to sanitize pools up to 50,000 gallons. It is a supplemental sanitizer that works alongside your primary chlorine or salt system, so you can run less chlorine.

What It Is For

• Adding advanced oxidation (AOP) to destroy contaminants that chlorine alone leaves behind.
• Cutting chlorine demand, chloramine odor and eye irritation.
• New builds or adding to existing equipment pads.

Specifications

• Part number: JAOPX500
• Max pool volume: 50,000 gallons
• Max flow rate: 50 GPM
• Ozone: 3 corona discharge cells, 500 mg/h
• UV-C lamp: 254 nm, rated 16,000 hours
• Power: 240 VAC, 60 Hz, single phase, 0.6 A
• Plumbing: 2 in. PVC unions, inlet and outlet
• Dimensions: 28 in. H x 17 in. W x 10.5 in. D
• Mounting: floor or wall
• Certifications: NSF/ANSI/CAN 50, UL and cUL

Compatible With

• Any primary residual sanitizer, such as a salt chlorine generator or a chlorine feeder
• Replaces DEL Ozone SEC-100-26 and SEC-110-26

How to Use It

• Install in the main return line after the pump, filter, heater and cleaner.
• Keep the AOP outlet at least 10 ft from the first return to the pool.
• Wire to 240 VAC per the Jandy JAOPX500 manual. Electrical work should be done by a qualified professional.
• Run the pump at a speed that keeps at least the required flow through the unit while it is on.

Note: AOP is a supplemental sanitizer and does not replace chlorine. Indoor and covered pools require the Jandy JMDVIN mixing degas vessel (sold separately).