Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Other parts on the same Jandy CS Series Cartridge Filter
The Jandy Filter Cartridge (R0462300) is for pools with a Jandy CS150 cartridge filter. This genuine 150 sq. ft. element measures 8-15/16 in. across and 23-5/16 in. long, and catches fine dirt to keep your water clean.
- Replacing a worn, torn, or clogged cartridge in a Jandy CS150 filter.
- Restoring flow and filtering after a cartridge stops cleaning up with hosing.
- Part: Jandy CS150 Cartridge Element, 150 sq. ft.
- Part number: R0462300
- Outside diameter: 8-15/16 in.
- Length: 23-5/16 in.
- Inside diameter: 4 in.
- Genuine Jandy (Zodiac) replacement
- Jandy CS150 cartridge filters
- Cross-references: Pleatco PJANCS150, Unicel C-8414, Filbur FC-0822
- Turn off the pump and open the air relief valve to release pressure.
- Remove the filter tank top and lift out the old cartridge.
- Rinse the tank and check the tank O-ring.
- Drop in the new cartridge, seat it, and close the tank.
- Start the pump, bleed the air, and note the new clean pressure.
Note: Clean the cartridge when pressure rises 10 psi above the clean reading. Replace it every 1-3 years depending on use.




