Find your parts diagram

HaywardHDFS400

Hayward Universal HC Series 400K BTU Dual Fuel Pool Heater with OmniX, Low NOx | HDFS400

Dual Fuel

Will it work for your pool?

Heat input399,900 BTU/hr
FuelNatural gas or propane
Footprint21 in. x 21 in.
Water flow30 to 125 GPM
Power120V or 240V, 5.5 A max
  • Hayward warranty: 3 years parts, 1 year labor. Claims go to Hayward.
  • Professional installation available in LA and Ventura County

Available In Store Only

Visit your nearest Discount Pool Mart for pricing and availability.

4.7★★★★★★★★★★ Customers love us · 600+ reviews

Available in our stores

This item is sold in store only. Visit any Discount Pool Mart for pricing, availability and expert advice.

All store hours & details →

Have a question about this part?

CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov

Overview

The HDFS400 is the 400K BTU model in Hayward's Universal HC Series dual fuel gas heaters with OmniX. It is built for tight equipment pads: the base is 21 in. x 21 in. and the back can sit against a wall with no clearance, so it fits where a wider heater will not.

One heater covers both fuels. It ships set up for natural gas, and the parts to convert it to propane come in the box. The top comes off with a single fastener and can be reversed to move the plumbing from right to left, and all service is done from the top.

OmniX is built in for programming and diagnostics, and the universal display works with Hayward Omni and OmniX automation and with other brands' controllers.

Other sizes in this series: 275K BTU (HDFS275).

Highlights

Natural gas or propaneShips set up for natural gas. Propane conversion uses the mixer and label packed with the heater, installed by a qualified service agency.
Smallest footprint21 in. x 21 in. base with zero clearance at the back, for pads where a standard heater does not fit.
OmniX built inProgramming, diagnostics and remote connection are part of the heater. Phone control from anywhere needs the OmniX Gateway, sold separately.
Top-access serviceNo side panels to remove. The reversible top swaps the plumbing side and gives access to the gas shutoff and voltage selection.
Cupro-nickel heat exchangerStandard. Hayward uses it to resist corrosion and early wear when water chemistry drifts.

Specs

Gas input399,900 BTU/hr
FuelNatural gas or propane (field convertible)
Thermal efficiency84%
Minimum water flow30 GPM
Maximum water flow125 GPM
Water connections2 in. x 2-1/2 in.
Gas connection at heater3/4 in.
Gas inlet pressure4.0 to 14.0 in. w.c., natural gas or propane
Electrical120 or 240VAC, 60 Hz, single phase, 5.5 A maximum (factory wired for 240V)
IgnitionSilicon nitride hot surface igniter, pre-mix combustion
Heat exchangerCupro-nickel
Heater size28 in. wide x 21 in. deep x 31 in. high
Footprint21 in. x 21 in.
ClearancesBack 0 in., front 18 in., water connection side 12 in., opposite side 6 in.
InstallationOutdoor or indoor
Remote control2-wire, 3-wire, or RS485 with Omni
EmissionsLow NOx

Works with

  • Hayward Omni and OmniX automation
  • Other brands' automation systems through the universal display or a 2-wire / 3-wire remote
  • OmniX app for phone control, with the OmniX Gateway (sold separately)

Warranty and installation

WarrantyHayward warranty: 3 years parts, 1 year labor. Claims go to Hayward.
InstallationProfessional installation available in LA and Ventura County

Questions

Is it natural gas or propane?Both. The heater ships set up for natural gas. The parts to convert it to propane are packed with the heater, and the conversion has to be done by a qualified service agency.
Can I control it from my phone?Yes, with the OmniX app. Control from anywhere needs the OmniX Gateway, which is sold separately.
How much room does it need?The base is 21 in. x 21 in. Hayward lists 0 in. clearance at the back, 18 in. in front, 12 in. on the water connection side and 6 in. on the opposite side. With vinyl siding behind the heater, Hayward says to leave 12 in.
Can it go indoors?Yes. Hayward lists it for outdoor or indoor installation. Indoor installs need the venting and combustion air described in the manual.
What pump flow does it need?At least 30 GPM through the heater, and no more than 125 GPM. The bypass is built in.
What is the other size?The HDFS275 is the 275,000 BTU model in the same cabinet.

Documents

Google reviews

What LA pool owners say about us

Google reviews of our 8 stores — our service and shopping experience, not reviews of this product.