BWT F1 Robotic Pool Cleaner with 7" Water Capability | F1RX

Name: BWT F1 Robotic Pool Cleaner with 7" Water Capability | F1RX
Brand: BWT
SKU: F1RX
Price: 1199.99 USD
Availability: InStock

$1,199.99

Shipping calculated at checkout.

Brand: BWT

SKU: F1RX

CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov

Robotic Pool Cleaner

Shallow Water Ready

Up to 40 ft pools

BWT F1RX Robotic Pool Cleaner

Total coverage from deep end to Baja shelf

The BWT F1RX Robotic Pool Cleaner is designed to provide total pool coverage, including areas where most robotic cleaners cannot operate. It is capable of cleaning in water levels as low as 7 inches, making it suitable for Baja shelves, tanning ledges, and shallow beach entries that traditional robotic cleaners typically leave untouched. Built for pools up to 40 feet, it combines intelligent navigation, advanced filtration, and Bluetooth connectivity in a compact, energy efficient design.

CLEANS IN

7+ inch water

VACUUM POWER

Up to 6000 GPH

POWER USE

150 watts

Hyperfine dual filtration

Bluetooth control

1.5 hr | 2 hr | 2.5 hr cycles

BWT F1RX robotic pool cleaner product image

7 inches

Cleans ultra shallow areas most robots skip

Baja shelves, tanning ledges, and beach entries

BWT F1RX robotic pool cleaner in pool setting

One cleaner. Every zone.

From deep end floors to shallow water zones, the F1RX is built to service every section of the pool that holds water. The programmed cleaning path adapts to pool layout and surface type for consistent results across floors, walls, and waterlines.

SURFACE CLEANING

Floors, walls, waterlines

Maintains grip on steep inclines and a variety of pool finishes.

SMART PATHING

Adaptive navigation

Programmed path adjusts to your pool layout for full coverage.

Hyperfine filtration. Clear water.

The hyperfine double filtration system captures fine debris and dust for improved water clarity. High suction vacuum performance helps lift and remove debris while maintaining steady cleaning performance across the pool.

High suction vacuum power

Up to 6000 gallons per hour

Strong debris removal and lifting performance for day to day cleaning.

HYPERFINE DUAL

Double layer capture

Traps fine particles and suspended debris for cleaner water.

CONFIDENT CLIMB

Grip and traction

Designed to maintain traction on walls and steep inclines.

BWT F1RX robotic pool cleaner cleaning performance view

Bluetooth control. Simple operation.

Choose cleaning cycles, start and stop operation, and view status notifications through a compatible device. Three cycle options let you match the run time to pool conditions.

CONTROL

Bluetooth integration

Remote control, cycle selection, and status notifications.

CYCLES

1.5 hr, 2 hr, 2.5 hr

Programmable durations to match daily debris conditions.

BWT F1RX robotic pool cleaner Bluetooth control and design

EFFICIENCY

Energy conscious design

Operates efficiently at 150 watts while maintaining cleaning performance.

POOL SIZE

Up to 40 ft length

Built for residential pools up to 40 feet in length.

Set up right. Clean with confidence.

Proper placement, cable preparation, and startup steps help the cleaner track correctly and protect the power supply. Follow these operating recommendations for consistent performance.

POWER SUPPLY

Placement

Install the power supply at least 11.8 feet from the pool and a minimum of 12 cm above ground. The unit is not water resistant and must be kept away from moisture and direct sunlight.

CABLE

Prepare the floating cable

Fully unwind the cable before use. Extend a length equal to the pool diagonal measurement plus approximately two additional meters. Remove twists or loops prior to operation.

BEFORE YOU START

Quick inspection

Confirm the filter is clean and ensure no swimmers are in the pool before placing the cleaner in the water.

STARTUP

Begin the cycle

Allow the cleaner to settle on the pool floor before powering on. Connect the power supply to a wall outlet and press the illuminated On Off button to begin the cleaning cycle. Operating the unit outside of water may cause damage and void warranty coverage.

Specs at a glance.

The F1RX delivers reliable robotic cleaning performance across all pool zones, including ultra shallow areas, combining strong suction capability, advanced navigation, and efficient operation in one comprehensive cleaning solution.

POOL SIZE

Up to 40 feet

CABLE LENGTH

59 feet

CYCLE OPTIONS

1.5 hr | 2 hr | 2.5 hr

FILTRATION

Hyperfine double filtration

POWER USAGE

150 watts

SIZE AND WEIGHT

Dimensions 15.5 x 14 x 8 inches
Weight 13 lbs

Warranty coverage

3 YEARS

Power supply, cable, motor

1 YEAR

Plastic components, brushes, tracks, filter

QUICK NOTE

The power supply is not water resistant. Keep it away from moisture and direct sunlight, and maintain the recommended placement distance and height.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

Los Angeles Local Installation Request

Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we’ll contact you soon to schedule your local service!

Click to Request Install