Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Bio-Dex Skill-It Pool Algaecide | 32 oz | SK132
Pickup, delivery and shipping times are estimates, not guarantees.
Couldn't load pickup availability
● 225 in stock30-day returns Secure checkout
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
The Bio-Dex Skill-It Pool Algaecide 32 oz SK132 is a fast-acting, non-metallic algaecide designed to eliminate resistant algae types such as black, mustard, and green algae. It is highly effective in treating stubborn algae while being safe for use without causing staining or altering pool pH. This algaecide can be applied directly to the water and requires only a small amount for treatment—typically around 5 oz per 10,000 gallons of water for a breakout dose. Additionally, it helps prevent future algae growth when used as part of regular pool maintenance. For best results, it's recommended to brush the pool and vacuum any debris before applying the product.
-
Fast-Acting Algaecide for Resistant Algae – The Bio-Dex Skill-It Pool Algaecide SK132 is designed to eliminate stubborn algae types such as black, mustard, and green algae, offering quick and effective treatment for tough algae problems.
-
Non-Metallic and Safe for Pools – This algaecide is non-metallic, ensuring it won’t cause staining or alter the pool’s pH levels, making it a safe option for use in various pool types.
-
Small Dosage for Effective Treatment – Only 5 oz per 10,000 gallons of water is needed for a breakout dose, making it a highly efficient solution for treating algae outbreaks and preventing future growth.
-
Best Used with Pool Brushing and Vacuuming – For optimal results, it's recommended to brush the pool and vacuum any debris before applying the algaecide, ensuring maximum contact with algae and improving overall pool cleanliness.
- (1) Bio-Dex SK132 32 Ounce Skill-It
Ensure all pool equipment is working properly. Backwash the filter system following manufacturers directions. Adjust pH between 7.2 - 7.6. Adjust chlorine residual to 1-3 ppm. In a chlorine treated pool, add stabilizer to establish minimum 40-50 ppm to reduce the degrading effects of sunlight upon the chlorine residual. Check for metals and if present add stain and scale inhibitor to prevent staining due to metals. Add this product directly to the pool by pouring around the entire perimeter of the pool. Allow the filter to run for at least 6 hours after adding algaecide. During this period, swimmers must not be allowed in the water.
Initial application
2. Vacuum algae debris and thoroughly brush pool.
3. Add 12.8 oz. of this product to each 25,000 gal. of water {(5.12 oz. per 10,000 gal.)}.
4. Vacuum pool after 24 hours to remove dead algae.
5. If algae is still visible repeat dose (steps 3 & 4) as necessary until pool is free of visible algae.
6. Allow the filter to run for at least six (6) hours after adding algaecide. During this period, swimmers must not be allowed into the water.
7. Once algae are under control, clean filter and return to normal operation.
Maintenance Application: