Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Bio-Dex Liquid Stabilizer Conditioner | 1 GAL | LC004
Pickup, delivery and shipping times are estimates, not guarantees.
Couldn't load pickup availability
● 105 in stock30-day returns Secure checkout
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
A properly stabilized pool will extend the life of your sanitizer and save you money by avoiding excessive chlorine demand. Stabilizer is to pool chlorine as your home’s insulation is to retaining warm or cold air – it helps chlorine last longer. When the stabilizer level in your pool is low, you’ll need to use a lot more chlorine to keep your swimming pool clean, so you’ll spend more money on chlorine. Use Bio-Dex Liquid Stabilizer Conditioner to maintain appropriate stabilizer levels in your pool.
Liquid Stabilizer Conditioner dissolves rapidly to reduce the loss of chlorine in pool water caused by the ultraviolet rays of the sun.
- Turn on the circulation pump.
- Shake the product well before use.
- Slowly add an entire gallon of Liquid Stabilizer Conditioner to the pool in front of a return
- Rinse the container with pool water and shake. Repeat step #3.
- Re-balance your swimming pool in accordance with the guidelines below.
NOTE: It is normal for the pool water to become a cloudy following application for a short period of time. Allow 30 minutes for the pool to clear.
- Maintain pH in the range of 7.4 to 7.6.
- Maintain total alkalinity in the range of 60 to 120 ppm.
- Maintain calcium hardness range between 200-400 ppm.
- Maintain available chlorine level at 2-4 ppm.
Use a reliable test kit to determine stabilizer concentration in water. If the pool water tests less than 40 ppm (parts per million) add Liquid Stabilizer Conditioner to obtain a level of 40-100 ppm. One gallon container will raise a 10,000-gallon pool's stabilizer concentration to 32 ppm.
Cyanuric Acid ......................24.92%
Inert Ingredients .................75.08%
Total ....................100%