Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
Ashland PS50V 1/2 HP Thermoplastic Submersible Sump Pump - Vertical Float, 115V | PS50V1-10
Pickup, delivery and shipping times are estimates, not guarantees.
Couldn't load pickup availability
● 2 in stock30-day returns Secure checkout
Store Availability
Checking store stock…
Choose store pickup at checkout. Usually ready in 1–3 hours during store hours. Not at your store? We can transfer it there, usually in a couple of days.
Have a question about this part?
Ask about fit, specs or shipping and get an instant answer.
Goes with this part
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
More power for deeper lifts. The Ashland PS50V (PS50V1-10) is a 1/2 HP thermoplastic submersible sump pump with a vertical float switch that runs automatically. Its extra horsepower pushes water higher and faster than a 1/3 HP pump, making it a strong choice for deeper pits, longer discharge runs, or draining a pool. Corrosion-resistant thermoplastic build with an aluminum motor housing for cool, reliable running.
- Automatically pumps water from sump pits, drained pools, vaults, or flooded areas.
- 1/2 HP moves up to 68 GPM with up to 32 ft of lift (max head).
- Vertical float switch cycles the pump on and off automatically.
- Motor: 1/2 HP, 115V, continuous-duty
- Max flow: 68 GPM; max head: 32 ft
- Discharge: 1-1/2 in.
- Passes solids up to 3/8 in.
- Switch: vertical float (automatic)
- Power cord: 10 ft
- Fits basins and pits as small as 11 in. in diameter
- Corrosion-resistant thermoplastic volute; aluminum motor housing; vortex impeller
- Set the pump flat on the bottom of the sump pit or basin.
- Connect a 1-1/2 in. discharge pipe or hose and route it to drain.
- Plug into a grounded 115V outlet (GFCI recommended); the vertical float will cycle the pump automatically.
- Keep the intake and float clear of debris.