Aiper Scuba N1 Max Cordless Robotic Pool Cleaner
Couldn't load pickup availability
CA P65 Warning: Cancer and reproductive harm. www.p65warnings.ca.gov
Aiper Scuba N1 Max
Three hours. One charge.
The whole pool.
Cordless robotic cleaner · floor, walls and waterline
No cord. No booster pump. No hose in the skimmer.
The Scuba N1 Max runs entirely off its own 7,800 mAh battery. Nothing plumbs into your equipment pad, nothing floats a hose across the surface, and nothing has to be untangled before you can swim. You drop it in, it maps the pool, and it parks itself at the waterline when it is finished so you can lift it out with the hook.
Twice the power
Two brushless pumps,
not one
Most cordless cleaners in this class run a single jet. The N1 Max runs two brushless pumps in parallel, which is what lets it lift wet sand and waterlogged leaves on the first pass instead of pushing them into a corner.
Comparison figures as published by Aiper.
Rollers that reach the grout line
Two full-width brush rollers, one fore and one aft, turn against the direction of travel so debris is agitated loose before the jets pick it up. Continuous tracks rather than wheels keep contact across tile, plaster and vinyl.
WavePath™ 3.0
It knows where it has already been
WavePath 3.0 plans a lane-by-lane route instead of bouncing at random, so one cycle covers the floor, climbs the walls and finishes along the waterline — with no patch cleaned twice and no patch missed.
7,800 mAh
High-capacity pack sized for a full cycle on large residential pools.
4-hour charge
Charge it on the included dock between cycles. No pad power required.
2,150 sq ft
Maximum cleaning range on one charge, floor and walls combined.
WaveLine™ 2.0
The scum line is where people actually look
Oils, sunscreen and pollen collect in a band right at the surface, and it is the first thing a guest notices. WaveLine 2.0 holds the cleaner horizontally against the wall at the waterline and scrubs along it in a continuous pass, rather than clipping it on the way past.
Two-stage filtration
Big stuff first,
then the stuff you can't see
The basket lifts straight out of the top by its handle — no tipping the machine upside down over a lawn, no rinsing debris back into the pool.
Heavy-duty filter basket
Run the basket on its own for a first pass after a storm or a leaf drop, when volume matters more than fineness.
3 µm MicroMesh™ ultra-fine filter
Drop the replaceable MicroMesh insert into the basket for day-to-day polishing and it captures down to three microns.
Ultrasonic sensing
It sees the step before it hits it
Ultrasonic sensors read what is ahead and steer around it, so the cleaner turns out of sun shelves, benches and ladders instead of bumping along them. Fewer collisions means less wear on your tile and less wear on the machine.
Aiper app
Set it from the deck chair
- Battery statusLive
- Cleaning mode switchSmart / Floor / Wall
- Cleaning historyTracked
- Maintenance alertsPush
- Aiper AI chatbotIn-app
Optional accessory — sold separately
HydroComm™ Pro
A floating relay that carries signal through the water to the cleaner, so you can change modes mid-cycle, park it at the waterline on command and read water-quality data in the app.
Automatic waterline parking
Send it to the wall when you want it out.
Mid-cycle mode switch
Change from floor to wall without lifting it.
Water quality testing
Readings surfaced in the Aiper app.
Fitment
Surfaces and shapes
Built for in-ground pools up to 2,150 sq ft.
Surfaces
Shapes
Debris
In the box
What ships
- Aiper Scuba N1 Max1x
- Charging dock1x
- DC charger1x
- Retrieval hook1x
- User manual1x
- Quick start guide1x
Backed by Aiper's 2-year Full Product Care.
Specifications
The numbers
Performance
| Suction power | 6,600 GPH |
|---|---|
| Pump configuration | Two brushless pumps |
| Maximum cleaning range | 2,150 sq ft per charge |
| Runtime | Up to 180 minutes |
| Cleaning surfaces | Floor, walls, waterline |
| Cleaning modes | Smart, Floor, Wall |
| Path planning | WavePath 3.0 |
| Waterline scrubbing | WaveLine 2.0, horizontal |
| Obstacle avoidance | Ultrasonic sensors |
Power & charging
| Battery | 7,800 mAh |
|---|---|
| Charge time | Approx. 4 hours |
| Charging | Dock and DC charger included |
| Cord required in pool | None |
Filtration
| Stage one | Heavy-duty filter basket |
|---|---|
| Stage two | 3 µm replaceable MicroMesh ultra-fine filter |
| Basket access | Top-load, lift-out handle |
Compatibility & compliance
| Pool type | In-ground |
|---|---|
| Surfaces | Vinyl, concrete, fiberglass, mosaic tile |
| Shapes | Rectangle, round, kidney, custom |
| App | Aiper app, iOS and Android |
| UPC | 850075054046 |
| FCC ID | 2BD5N-SCUBAX1 |
| Certification | ETL listed 5031167 · UL 1081 · CSA C22.2 No. 218.1 |
| Country of manufacture | Vietnam |
| Warranty | 2-year Full Product Care |
Questions
Before you buy
Will it climb my walls, or only do the floor?
Can I change the mode once it is in the water?
How big a pool will one charge do?
What is the difference between the basket and the MicroMesh filter?
How do I get it out of the pool?
Does it work in a saltwater pool?
Can I leave it in the pool between cycles?
Does it replace my filter and pump?
Questions & Answers
Have a Question?
Be the first to ask a question about this.
Los Angeles Local Installation Request
Need professional pool equipment installation in the Los Angeles, California area? We handle installation of heaters, pumps, filters, automation systems, and more. Fill out the form below, and we’ll contact you soon to schedule your local service!