Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
SeaKlear 90336SKR Phosphate Remover is a high-strength, 1-gallon liquid treatment designed for residential and commercial pools experiencing elevated phosphate levels. Using a lanthanum-based formula, this product can remove up to 9,000 ppb of orthophosphates per 10,000 gallons in a single application, making it ideal for high-phosphate loads from fertilizer runoff, heavy bather load or salt chlorination systems. The bottle is sized for large treatment cycles while being safe for use on all pool finishes and with any sanitizer system. For ongoing maintenance, the dosage guideline is typically 1 oz per 5,000 gallons to keep phosphate levels under 125 ppb. Proper use helps restore water clarity, improve sanitizer efficiency and reduce algae-growth risk in your pool system.
-
Commercial-Grade Concentration: Capable of eliminating up to 9,000 ppb of phosphates in 10,000 gallons with a single dose, making it suited for heavy contamination or professional service use.
-
Maintenance Dose Simplicity: Once the phosphate level is reduced, ongoing dosing is only 1 oz per 5,000 gallons to maintain acceptable levels and protect your system from phosphate-driven issues.
-
Enhances System Efficiency: By removing phosphates that drain sanitizer strength and cloud water, this product supports clearer water, fewer algae outbreaks and improved heater or salt-system performance.
-
Safe for All Pools: Compatible with chlorine, salt, mineral and UV sanitation systems and safe on plaster, vinyl and fiberglass surfaces when used according to instructions.
-
Large-Capacity Bottle: The 1-gallon size allows treatment of large pools or multiple systems, making it a high-value option for service professionals or pool owners with large volumes.
Initial Treatment for High Phosphate Levels
Start by cleaning or backwashing your filter. Use the dosage chart below to determine how much product to add. Pour the Phosphate Remover evenly across the pool surface instead of concentrating it in one area. Keep the filtration system running continuously for at least 24 hours. If the filter pressure rises more than 10 psi above its normal level, clean or backwash the filter again. After 48 hours, test with a pool-approved phosphate test kit and apply another dose if needed.
Weekly Maintenance
Use 1 ounce of Phosphate Remover per 5,000 gallons of water each week to help keep phosphate levels below 125 ppb.
Dosage Guide
| Phosphate Level (ppb) | 5,000 Gallon Pool | 10,000 Gallon Pool |
|---|---|---|
| 250 | ½ oz | 1 oz |
| 500 | 1 oz | 2 oz |
| 1,000 | 2 oz | 4 oz |
| 3,000 | 6 oz | 12 oz |
| 4,500 | 8 oz | 16 oz |
| 9,000 | 16 oz | 32 oz |
Important Notes
Some cloudiness is normal during treatment—this means the product is binding and removing phosphates. The water may remain hazy for up to 48 hours depending on phosphate levels and filter performance. Swimming should be avoided until the water clears. If needed, you can speed up the process by using SeaKlear Chitosan Clarifier at 2 oz per 5,000 gallons.
What LA pool owners say about us
Google reviews of our 8 stores — our service and shopping experience, not reviews of this product.
