Find your parts diagram
Sticker on the pump body (the part with the basket), not on the motor. Motor labels from Century, A.O. Smith or Regal won't match parts.
Label on the side of the tank near the base. Size is in sq ft, e.g. 420 sq ft = C4030 or CCP420.
Rating plate inside the front access panel. Note the BTU and gas type (NG or LP).
Molded into the body or printed on top. Robotic cleaners: on the power supply.
Still not sure? Call (818) 818-6559 and we'll find it for you.
The SeaKlear 90-Day Algae Prevention & Remover (1 Gallon, SKU 90311SKR) is a highly concentrated algaecide formulated to kill and prevent multiple algae types—including blue-green, green, yellow and black—for up to three months per treatment when used in properly balanced pool water. Featuring a low-dose copper complex (approx. 11.8% copper sulfate pentahydrate, 3% elemental copper) it delivers long-term residual protection, is non-foaming and non-staining when applied as directed. This product is ideal for service professionals or informed DIYers seeking a “set-and-forget” algaecide for their pool water maintenance every 90 days.
-
Extended Algae Control Cycle: One application lasts up to 90 days and includes a no-algae guarantee when used per instructions in properly balanced pool water.
-
Broad-Spectrum Algae Efficacy: Targets and prevents blue-green, black, yellow, mustard, and traditional green algae—delivering versatile performance across algae types.
-
Non-Foaming, Non-Staining Formula: Designed to maintain clarity and appearance of surfaces without causing foam build-up, pool liner marks, or other staining when used as directed.
-
Low-Dose Copper Complex: Formulated with approximately 11.8% copper sulfate pentahydrate (~3% elemental copper) for sustained residual protection and proven performance.
-
Economical & Simplified Treatment: Routine dosage is only 16 fl oz per 10,000 gallons every three months, reducing maintenance frequency and simplifying your service schedule.
Dosage Rates
Every 3 Months (Algae Prevention)
Use 16 fl oz of SeaKlear Algae Prevention & Remover for every 10,000 gallons of pool water
(or 500 ml per 40,000 L).
Severe Algae Treatment
Use 32 fl oz of SeaKlear Algae Prevention & Remover for every 10,000 gallons of pool water
(or 1 L per 40,000 L).
General Directions
-
Keep pool water pH between 7.2 and 7.8.
-
For severe algae, lower pH to 7.2.
-
-
Maintain total alkalinity between 80–120 ppm.
-
Make sure the pool’s filtration system is running properly.
-
Brush the pool regularly.
-
Calculate how much product your pool needs based on its volume.
-
Add the product directly into the deep end, ideally near a return line.
-
For pools with plaster finishes, dilute the product in a bucket of pool water before adding.
-
-
This product must be used together with an EPA-registered sanitizer (like chlorine) to help control bacteria.
What LA pool owners say about us
Google reviews of our 8 stores — our service and shopping experience, not reviews of this product.
