Pool Breeze 1 lb Shock Power 73% , 12 pack| 88500
Pool Breeze 1 lb Shock Power 73% , 12 pack| 88500
SKU#: 88500
POOL Breeze® Power 73% Shock
Power 73 Shock calcium hypochlorite 73% is a highly effective, all-in-one product that sanitizes, clarifies, shock treats and helps prevent algae. It’s convenient, easy-to-use and won’t over-stabilize your pool.
In store only
Pool Shocks & Oxidizers
Shocks and oxidizers offer a convenient and effective way to clarify and keep your pool water free from contaminants. Choose from a variety of POOL Breeze® products to shock treat weekly, oxidize and start swimming ASAP!
- Shocks, clarifies, sanitizes, and helps prevent algae in your pool
- Won't over-stabilize your pool
- Clear up cloudy water, and make it healthier on swimmer's skin
-
Product Details
About this product
Description
The easy routine in chlorine™
POOL Breeze® is a full line of water care products designed to simplify your routine and ensure your family has more fun in the sun. Explore our products, get easy-to-follow troubleshooting tips and learn how to care for your pool the easy way.
Highlights
Clear up cloudy water, and make it healthier on swimmer's skin.
POOL Breeze® Power 73 shock is an advanced mono-layer technology that helps save water and money.
The product is stable and non-reactive under normal conditions of use, storage and transport.Features
Pool Shocks & Oxidizers
Shocks and oxidizers offer a convenient and effective way to clarify and keep your pool water free from contaminants. Choose from a variety of POOL Breeze® products to shock treat weekly, oxidize and start swimming ASAP!
- Shocks, clarifies, sanitizes, and helps prevent algae in your pool
- Won't over-stabilize your pool
- Clear up cloudy water, and make it healthier on swimmer's skin
Brand Information
Contact Us Have a question about a product or need advice from one of our POOL Breeze® experts? Reach out to us one of the following ways. Helpline To speak directly with a pool care specialist, please call the POOL Breeze® Helpline at 1-888-433-3029.
Visit Manufacturers Website -
Specifications
Problem:Cloudy Water
Solution:There are many causes of cloudy water, the most common being incorrect pH, incorrect total alkalinity (TA) and improper filtration. Always check and adjust the pH and TA levels before adjusting your filtration system. Thereafter follow these steps to investigate your filtration system:
Step 1: Make sure that the filtration system is running smoothly and that it is running at least 8-12 continuous hours daily.
Step 2: Does the filter need to be cleaned or backwashed? If yes, try cleaning your filter.
Step 3: If the filter pressure does not return to normal starting pressure after backwashing, the filter needs to be chemically cleaned.
Step 4: Be sure you have emptied the basket and/or skimmer if you haven’t done so already.
Step 5: Also test your water to make sure that the pH and total alkalinity are within the ideal range.
Step 6: Shock the pool with POOL Breeze® TopShock® or POOL Breeze® Power 73 Shock. Remember to wait until the chlorine level drops to between 1-4 ppm before re-entering the pool.
NOTE – POOL Breeze® MegaBlu™ Clarifier, POOL Breeze® Floc Clear and POOL Breeze® Enzyme Clarifier can also be used to clear cloudy water. Your authorized POOL Breeze® Dealer can recommend which products are best for use in your pool.
Problem:Algae
Solution:The addition of sanitizer, shock and algaecide on a regular basis will be more effective at preventing algae growth than treating algae once it is visible in a pool. However, if algae does appear, follow the steps below for treatment:
Step 1: Adjust the pH to 7.2 – 7.4.
Step 2: Brush the pool walls and floor completely.
Step 3: Shock the pool with POOL Breeze® TopShock® or POOL Breeze® Power 73 shock.
Step 4: After 24 hours, add POOL Breeze® Defender or another POOL Breeze® Algaecide according to label directions. Your authorized POOL Breeze® Dealer can recommend which product is best for your pool.
Step 5: Run the filter 24-48 hours, brushing and vacuuming frequently.
Step 6: If algae remains a problem, contact your authorized POOL Breeze® Dealer for further directions.
NOTE – If you continue to experience algae, despite a high chlorine reading, the pool water may contain too much stabilizer (cyanuric acid) which interferes with the efficiency of the chlorine.
Problem:Colored Water
Solution:Colored water (clear green/brown/yellow tint with no algae) has generally two causes – dissolved metals or a high organic content in the water. Follow these steps for sparkling clear water:
Step 1: Take a sample of the water to your authorized POOL Breeze® Dealer for a full analysis.
Step 2: If metals are detected, add POOL Breeze® Metal Removing Agent per label directions.
Step 3: If a high organic content is suspected, shock the pool with POOL Breeze® TopShock® or POOL Breeze® Power 73 Shock per label directions. Remember to wait until the free chlorine level has dropped to between 1-4 ppm before re-entering the pool.
Problem:Eye and Skin Irritation
Solution:Often high levels of chlorine are blamed for eye and skin irritation or a strong chlorine odor. In fact the reason could be too little free available chlorine and an incorrect pH. Follow the recommendations below:
Step 1: Check pH and alkalinity levels and adjust as necessary.
Step 2: Shock the pool with POOL Breeze® TopShock or POOL Breeze® Power 73 Shock. Once you have done this, remember to recheck the pH and total alkalinity levels and readjust if necessary. Remember to always keep the chlorine levels between 1-4 ppm.
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account