Pentair Brass Junction Box | 78310500
Pentair Brass Junction Box | 78310500
SKU#: 78310500
78310500 Pentair 1/2-Inch Black Junction Box Port Replacement Pool and Spa Light Systems
$39.99
Junction Box Features:
- Fits Pentair pool and spa light system
- Polycarbonate cover with brass base
- Measures 11-inch length by 13-inch height by 9-inch width
- (3) 1/2" Ports
- Color: Black
- Top Frame: 5-3/8" x 3-5/8"
- Bottom Housing: 4-1/4" x 2-1/2"
- Height: 2-1/2"
-
Product Details
About this product
Description
A. THE FOLLOWING PREPARATORY STEPS MUST BE COMPLETED BY THE CERTIFIED ELECTRICIAN
BEFORE LIGHT IS INSTALLED - SEE FIGURE 1.
1. Ensure that the electrical system of your pool conforms with all requirements of the National Electrical Code (NEC),
and all local codes and ordinances. A licensed or certified electrician must install the electrical system to meet or
exceed those requirements before the Junction Box is installed. Some of the NEC requirements are listed below.
2. To be certain that the pool’s electrical system meets all applicable requirements, the electrician should
also consult the local building department.
3. Position Junction Box to meet National Electrical Code (NEC) requirements and to prevent hazard to personnel.Highlights
4. The center conduit hub is provided with a strain relief for a cord size up to a 10/3 AWG cord. Use underwater lights
with water resistant cord only.
5. Three equipment grounding terminals are provided for internal grounding suitable for #16 AWG to #10 AWG wire.
One pressure wire grounding terminal is provided for a #8 AWG insulated copper bonding wire.
6. Install the Junction Box gasket between the Junction Box base and cover. Replace gasket if worn or damaged (P/N
79300600).
7. Plug any unused conduit hubs with the conduit plugs provided.Features
Junction Box Features:
- Fits Pentair pool and spa light system
- Polycarbonate cover with brass base
- Measures 11-inch length by 13-inch height by 9-inch width
- (3) 1/2" Ports
- Color: Black
- Top Frame: 5-3/8" x 3-5/8"
- Bottom Housing: 4-1/4" x 2-1/2"
- Height: 2-1/2"
Brand Information
Founded in 1966, Pentair has engineered water solutions to filter, clean and sanitize water to its purest state, while automation equipment makes it all easy to control from anywhere so that you can truly enjoy your pool and spa.
Visit Manufacturers Website -
Specifications
This 1/2-inch junction box port is designed to use with Pentair pool and spa light system. Polycarbonate cover with brass base.
-
Q/A
No Questions
Log in
Create a Free Account
Please fill out sign-up form
Sign up with your social media account
Or
Fill out sign up form
Why create an account
Sign up with your social media account