Intex | 28000E | Deluxe Wall Mount Surface Skimmer

$49.99
Out of stock
SKU
28000E
Ask a Question

Ask a Question

Intex | 28000E | Deluxe Wall Mount Surface Skimmer

SKU#: 28000E

$49.99

Keep your pool clear of leaves and debris all summer long with the Intex Deluxe Wall Mount Surface Skimmer routes surface water through the strainer basket on its way to the filter pump, automatically catching leaves and other debris before they sink to the bottom of the pool!

  • Requires an Intex Filter Pump with a minimum flow rate of 800 gallons per hour (3.0 m3/hr)
  • Easily mounts to Easy Set or Metal Frame Pool sidewalls

If no water is flowing into the pump, make sure that the surface skimmeris perpendicular to the water surface and below the water surface. Open the air release valve located on the filter housing top cover. When water starts to flow out, close the air release valve back. Never run the pump dry as the motor may overheat and damage the pump!

  • Remove the skimmer and the hook assembly from the pool before placing a pool cover over the pool.
  • Store the product and accessories in a dry and safe place indoors.

NOTE: On a weekly basis, remove the hose adaptor from the outlet fitting connection to ensure the threaded strainer connector is free from debris, hair and algae. Also make sure the cartridge in the fi lter pump is clean and there is no leakage in the circulation system.

Ask a Question
Intex | 28000E | Deluxe Wall Mount Surface Skimmer Intex | 28000E | Deluxe Wall Mount Surface Skimmer Intex | 28000E | Deluxe Wall Mount Surface Skimmer
Intex | 28000E | Deluxe Wall Mount Surface Skimmer
  • Product Details

    About this product

    Description

    Setup Instructions:

    1. For Pool size 16' (488cm) and below:

        Unscrew the strainer grid from the threaded strainer connector (lower) from the inside of the pool.

    2. Depending on the size of pool you purchased:

        For 16' (488cm) and below pools with strainer

    1. Screw the house adaptor B(12) to the threaded strainer connector, from inside of the pool.
    2. Connect the other end of the skimmer hose (11) to the hose adaptor B (12)

        For 18' (549cm) and above pools with large strainer

    1. Screw the house adaptor B(12) to the threaded strainer connector, from inside of the pool.
    2. Connect the other end of the skimmer hose (11) to the hose adaptor B (12)

    3. Place the basket (4), cover rim (2) and the floating cover (1) into the skimmer (5). NOTE: The cover rim must be      installed in place in order to hold the floating cover in position.

    4. The floating cover (1) should be floating off the skimmer (5) by 1" to 5" (2.5cm to 12.7cm). Loosen the skimmer screw, slide the skimmer up and down on the assembled hook to adjust the height. Hand tight the screw when done.

    IMPORTANT: The skimmer must stay vertical at all times, so that the top of the floating cover can parallel to the water surface for skimming.

     

    Highlights

    Manufactured by Intex

    Easily mounts to Easy Set or Metal Frame Pool sidewalls

    Strainer basket is easy to clean and removes in an instant

     
     
     
     
     
     
     

    Features

    Keep your pool clear of leaves and debris all summer long with the Intex Deluxe Wall Mount Surface Skimmer routes surface water through the strainer basket on its way to the filter pump, automatically catching leaves and other debris before they sink to the bottom of the pool!

    • Requires an Intex Filter Pump with a minimum flow rate of 800 gallons per hour (3.0 m3/hr)
    • Easily mounts to Easy Set or Metal Frame Pool sidewalls

    If no water is flowing into the pump, make sure that the surface skimmeris perpendicular to the water surface and below the water surface. Open the air release valve located on the filter housing top cover. When water starts to flow out, close the air release valve back. Never run the pump dry as the motor may overheat and damage the pump!

    • Remove the skimmer and the hook assembly from the pool before placing a pool cover over the pool.
    • Store the product and accessories in a dry and safe place indoors.

    NOTE: On a weekly basis, remove the hose adaptor from the outlet fitting connection to ensure the threaded strainer connector is free from debris, hair and algae. Also make sure the cartridge in the fi lter pump is clean and there is no leakage in the circulation system.

    Brand Information

    Intex is a trusted and innovative company that delivers high quality products at an affordable price, all designed for comfort, safety and fun. From toys to above ground swimming pools, Intex is known for their unique products. Today, Intex products can be found in over 100 countries around the world.

    Visit Manufacturers Website
  • Specifications
  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov