SGM Dynamite Pool Patch Sets Underwater Repairs White 9lbs | PLBPP49

$29.99
In stock
SKU
PLBPP49
- +
Ask a Question

Ask a Question

SGM Dynamite Pool Patch Sets Underwater Repairs White 9lbs | PLBPP49

SKU#: PLBPP49

Dynamite Pool patch is a mixture of speciality cement and proprietary additives that permits underwater patching and general concrete repair work to be done instantly. Dynamite Pool patch can be used wherever a quick setting caulking or plugging material is needed.

$29.99

APPLICATIONS

Mix approximately one (1) part water to three (3) parts SGM Dynamite Pool Patch while stirring continuously or until the material has a dough-like consistency.
Using a steel trowel or pointed tool, force material into hole or crack. To repair water leaks for underwater use, apply pressure for a minimum of five (5) minutes or until the material has firmly set. Dampen material for fifteen (15) minutes after patching to prevent cracking.

  • Repair area must be clean and free of any paint, dust, or grease.
  • Use a Chisel V-shaped channel to allow easy application wherever possible.
  • Dampen area prior to application (when not underwater).

SAFETY DATA SHEET

Surface Preparation

Ask a Question
SGM Dynamite Pool Patch  Sets Underwater Repairs White 9lbs | PLBPP49 SGM Dynamite Pool Patch  Sets Underwater Repairs White 9lbs | PLBPP49
SGM Dynamite Pool Patch  Sets Underwater Repairs White 9lbs | PLBPP49
  • Product Details

    About this product

    Description

    Mix approximately one (1) part water to three (3) parts Dynamite Pool Patch while stirring continuously or until material has a dough like consistency. Warning: Warm water will accelerate set time of patch. Mix only as much as can be used in 3-5 minutes. Using a steel trowel or pointed tool, force material into hole or crack. To repair water leaks or for under-water use, apply pressure for a minimum of five (5) minutes or until material has firmly set. Dampen material for 15 minutes after patching to prevent cracking

    Highlights

    • Underwater pool repair
    • Underwater concrete repair
    • New construction
    • Remodeling
    • High Strength
    • Sets Underwater
    • Brilliant White

    Features

    APPLICATIONS

    Mix approximately one (1) part water to three (3) parts SGM Dynamite Pool Patch while stirring continuously or until the material has a dough-like consistency.
    Using a steel trowel or pointed tool, force material into hole or crack. To repair water leaks for underwater use, apply pressure for a minimum of five (5) minutes or until the material has firmly set. Dampen material for fifteen (15) minutes after patching to prevent cracking.

    • Repair area must be clean and free of any paint, dust, or grease.
    • Use a Chisel V-shaped channel to allow easy application wherever possible.
    • Dampen area prior to application (when not underwater).

    SAFETY DATA SHEET

    Surface Preparation

  • Q/A
    No Questions
WARNING! The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov